Operation Manual

44
Message Description Action
Image cannot be saved, improper
alignment. Please try again.
The saved panoramic pictures cannot be stitched.
Retry taking the panoramic
picture. The message will
disappear after 2 seconds.
Firmware update failed.
The camera cannot be updated during the rmware
update process.
The camera will shut down in 2
seconds.
Firmware version mismatch.
The rmware version does not match during the
rmware update process.
The message will disappear after
2 seconds.
Warning! Do not turn o your
camera during update!
The message appears during the rmware update
process.
The message disappears after the
camera update and restart.
Remove USB Cable! Indicates that you can disconnect the USB cable.
The message disappears after you
disconnect the USB cable.
Connection Failed! Failure to connect to your PC, printer, TV (with HDMI).
Remove USB cable and retry
connection