User Manual imagination at work GETTING READY GE Digital Camera Power PRO Series: X600 MODE OVERVIEW BASIC OPERATION PLAYBACK USING THE MENUS CONNECTIONS APPENDICES EN
BEFORE YOU START Declaration of Conformity About this Manual Responsible Party: General Imaging Company Address: 1411 W. 190th Street, Suite 550, Gardena, CA 90248, U.S.A. Customer Service Telephone Number: +1-800-730-6597 (Outside U.S. & Canada: +1-310-755-6857) Thank you for purchasing this GE digital camera. Please read this manual carefully and keep it in a safe place for future reference. For Customers in the U.S.A.
SAFETY NOTES Safety notes for this camera • Do not drop the camera or allow it to hit solid objects. • Do not attempt to disassemble the camera. • To prevent the camera from being damaged by moisture, do not use or store the camera in very humid environments, such as in rain or near bodies of water. • Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it.
• Do not store the battery in a hot environment or in direct sunlight. • Only use the supplied battery. • If the rechargeable Li-ion battery supplied with the camera needs to be replaced, contact the retailer or the customer service number listed in this manual. • If the rechargeable Li-ion battery in this camera overheats during charging, stop charging immediately and wait until it cools down to resume charging.
• When you insert a memory card, make sure the notch of the card matches the markings on the top of the card slot. Other Safety Notes • Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. • Do not hang the camera or strap around the neck of small children. • If the rechargeable Li-ion battery is used for the camera, only charge it with the supplied battery charger.
CONTENTS WARNING..............................................................1 SAFETY NOTES......................................................2 CONTENTS.............................................................5 GETTING READY...................................................9 Accessories Included...............................................................9 Attaching the Lens Cap and Shoulder Strap......................10 Part Names..................................................................
BASIC OPERATION...............................................36 PLAYBACK.............................................................46 Using EVF (Electronic View Finder).......................................36 Viewing Photos and Videos....................................................46 Using the Zoom Function........................................................36 Thumbnail View........................................................................47 Focus Setting.............................
AF-Assist Beam.................................................................55 Protect................................................................................63 Digital Zoom......................................................................55 Delete.................................................................................64 Date Imprint......................................................................55 DPOF (Digital Print Order Format)...............................
CONNECTIONS.....................................................72 Connecting to a Computer.....................................................72 Specifications............................................................................82 Setting the USB Mode.....................................................72 Prompts and Warning Messages..........................................86 Transferring files to your computer............................72 Troubleshooting.....................................
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.
Attaching the Lens Cap and Shoulder Strap 10
Part Names 2 6 1 7 8 9 10 11 5 12 4 13 3 18 17 14 15 16 11
28 19 20 21 29 27 26 25 24 31 OPEN 23 12 22 30
1 AF Assist Beam/Timer Indicator 12 Display Button 23 Shutter Button 2 Flash Lamp 13 Playback Button 24 Continuous Capture Button 3 Microphone 14 AF Button/Arrow Button (Up) 25 Fast Video Recording Button 4 Lens 15 Flash Button/Arrow Button (Right) 26 Power Switch 27 Mode Dial 5 LCD Screen 16 Delete Button/Self-Timer Button/ Arrow Button (Down) 6 Electronic View Finder (EVF) 17 Macro Button/Arrow Button (Left) 28 Flash Button 7 Electronic Viewfinding Window/ LCD Screen B
Charging Battery Before you charge your battery, you should turn the camera off and insert the battery. 3. When the camera is turned off, you can also connect the camera to your PC using a USB cable to charge the battery. 1. Connect the camera and the power charger using the supplied USB cable. (The plug shape of the power charger may vary depending on the country or region. The actual item may vary from the drawing below). 2.
Installing Battery and Memory Card 2. Insert the battery into the battery slot in the correct position as shown in the following diagram: OPEN 1. Open the battery cover.
4. Close the battery cover. OPEN 3. Insert the memory card into the memory card slot as shown in the diagram below: Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. If you have to purchase a memory card, select one with storage capacity between 4GB and 32GB to ensure correct data storage. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully.
Turning Camera On and Off Turn the power switch to turn on/off the camera. Power Switch Symbol Description In the instructions below, the following symbols may be used throughout this manual on how to operate the camera. This is to facilitate better understanding. [Button name]: When one button on the camera cannot be indicated by an icon, the symbol [ ] is used to indicate it. 「Item properties」: The option properties in the camera interface are indicated by the symbol「 」.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the arrow buttons to select your desired language. button to confirm the selection, the 3. After you press the Date/Time settings screen appears. 4. Press the left/right arrow button to select the Date/Time to be adjusted: Time is displayed in yyyy:MM:dd HH:mm. 5.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 7. Press the appears. func menu button and the following snapshot screen 1. Turn the camera on via the power switch. 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. func menu 3. Press the up/down arrow button to select , and press the button or right arrow button to enter the menu. 4.
MODE OVERVIEW Display Setting Press the button to display the settings: Classic, Full, Off. Default Mode: Displays the camera parameters on screen 1234 F3.2 1/50 -0.3 EV 400 ISO Grid: Camera parameters with Grid and Histogram 1234 F3.2 20 1/50 -0.
LCD Screen Display Overview of the screen icons in photo shooting mode 1 3 2 4 x3.5 19 5 6 7 8 17 9 16 10 1/50 -0.3 EV 15 14 13 20 Auto Mode Manual Mode Shutter Priority Program AE Face Beautifier Panorama Mode Black and White Scene Mode 1234 18 F3.2 1 Shooting Mode Icons 400 ISO Custom Settings 11 2 Macro Mode 12 3 Zoom Display (By turning the zoom lever) 4 Number of remaining shots 21 5 SD Memory Card/Built-In Memory x3.
13 Exposure Compensation (EV value) (Adjustable only in Mode) 14 Shutter Speed (Adjustable only in 15 Aperture Value (Adjustable only in 16 Focus Frame 17 Eye-Fi ON (with signal) 18 Expo Metering AiAE Spot Center 19 AF Mode Mode) Mode) Red-Eye Reduction 21 Self-Timer Self-timer Off 2 sec 10 sec Smile 22 HDR (Adjustable only in Mode) 23 Continuous Shot Single-AF Single Multi-AF Continuous Shot Object Tracking Cont. Shot- High Speed (VGA) 20 Flash Mode Force Off Flash Auto Force Flash Slow Sync.
Overview of the Screen Icons in Movie Mode 6 SD Memory Card/Built-In Memory 7 Battery Status 1 2 3 5 4 6 8 Video Quality 9 Picture Color 00:56 7 14 8 13 11 Exposure Compensation (EV value) 12 Eye-Fi ON (with signal) 12 9 10 -0.3 EV 11 1 Movie Mode Icons 2 Macro Mode 3 Self-Timer 10 sec 4 Zoom Display (by turning the zoom lever) 5 Remaining Recording time 10 VIS 13 Expo Metering AiAE Spot Center 14 AF Mode For optimal video shooting, it is recommended that an SDHC memory card be used.
Overview of the Screen Icons in Playback Mode 1 DPOF File 2 File Protection 1 2 3 Memory space (indicating the current number of photos and total number of photos) 3 6/45 4 5 13 4 SD Memory Card/Built-in Memory 5 Battery Status 6 Zoom Magnification Area 12 7 Image Zoom Ratios 11 6 7 8 10 8 Image Zone 9 Shooting Date 10 Continuous Capture Group Playback 11 Eye-Fi ON (with signal) 9 12 Red-Eye Reduction 13 HDR 24
Using the Mode Dial This GE camera provides a convenient mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name Auto Mode Manual Mode Shutter Priority Program AE Face Beautifier Panorama Mode Icon Description In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures.
Manual Mode Auto Mode Auto Mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to adjust your photos and videos for the best possible results. M When selecting manual ( ) mode, you can set the aperture and shutter speed manually. 1. Turn the Mode Dail to configure settings. and press the button to Follow these steps: 1. Use the power switch to turn the camera on. 2. Switch the Mode Dial to Auto Mode ( ). 3.
Shutter Priority S Auto Program Exposure When (Shutter Priority) is selected, you can adjust the shutter speed and EV value.The camera automatically sets the aperture value based on the shutter speed value to get the most appropriate exposure value. 1. Turn the mode dial to configure settings. and press the P When (Program AE) mode is selected, you can adjust the EV value and ISO value. 1. Turn the mode dail to configure settings. and press the button to button to 2.
Face Beautifier Panorama Mode In Portrait Mode, the camera is set to automatically adjust camera exposure for realistic portrayal of skin tones. 1. Turn the Mode Dial to select Face Beautifier Mode ( ). With Panorama Mode, you can take a series of pictures which will be stitched automatically into a ultra-wide panoramic picture by the camera. 2. Press the button and press the up/down button to select . Follow the steps below: 3.
4. Move or rotate the camera according to the set direction. When the range of movement or rotation meets the internal settings of the camera, the progress dialog along the indication arrow partially turns green. When it completely turns green, panorama mode shooting is finished. 5. The camera automatically stitches the pictures taken into a panoramic picture. After stitching, you can preivew it for 1 second.
In the Black and White Mode, the black and white effect has the following 8 options: • Normal • B&W + HDR • Retro • Salon • Color Separation (red) • Color Separation (yellow) • Color Separation (blue) • Color Separation (green) Scene Mode (SCN) You can select an appropriate mode from the 25 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically.
Scene Auto Scene Description Identifies the scene automatically; Person, Backlighting, Landscape, Macro, Night Scene, Night Scene Person, Auto. Landscape For landscapes and outdoor shots. Vivid reproduction of green and blue. Sport For fast-moving subjects. Capture sharp, action shots with minimal blur. This mode is not recommended for shooting indoors. Beach For taking pictures in areas with strong sunlight. Sunset For sunsets. Capture subjects in strong sunlight.
Scene 32 Description Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background. Text For taking pictures of text, documents or white boards. Portrait Most suitable for capturing people with focus on their face. Fish Eye For interesting fish eye effect. Party Suitable for taking indoor party pictures, even under the complicated lighting conditions. Indoor For indoor settings. Reduce blur and improve color accuracy. Leaf For plants.
Auto Scene Mode (ASCN) In “ASCN” scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Icon Mode Name Icon Mode Name Landscape Mode Night Landscape Mode Portrait Mode Macro Mode Night Portrait Auto Mode Backlit Portrait 2. Hold the camera steadily and aim at the subject. The optimum scene mode will be selected automatically. 3.
Mode Name Landscape Mode 34 Description For landscapes, ASCN will automatically adjust the exposure and reproduce vivid green and blue colors. Portrait Mode Most suitable for capturing people with focus on their faces. Night Portrait When you take portraits at night, or in low light conditions, ASCN will automatically adjust the exposure for people and night scenes.
Custom Settings The user can store the frequently used shooting modes and parameters and switch to this mode for quick adjustment. 6. Select「Yes」to save or「No」to cancel. Follow the steps below: 1. Select any mode or scene mode to be stored. 2. Set your desired parameters in the current mode. 3. Press the button, press the up/down arrow button to select , and press the button to enter the menu. func menu 4.
BASIC OPERATION Using EVF (Electronic View Finder) EVF functions as the LCD, which can be used to observe the scene and objects and for playback, preview and menu operations. Using the Zoom Function Your camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Toggle the Zoom Wheel of the camera to zoom in or out of the subject while taking pictures.
Focus Setting Macro Mode In different photo shooting modes, you can select different focus methods. 1. Press the up arrow button ( screen. ) to display the settings The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( Menu. ) to enter the Marco 2. Press the left/right to select the following 3 modes: Single-AF Multi-AF Object Tracking 3. Press the menu.
Self-Timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set for 2 seconds, 10 seconds or by smile detection. 1. Press the down arrow button ( self-timer menu. • Self-Timer - 10 sec A single picture is shot 10 seconds after the Shutter Button is pressed. • Self-Timer - Smile Press the Shutter Button and a picture will be taken immediately after a smile is detected. ) to enter the 3. Press the menu. 2.
Open Flash The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows. • Force Off Flash is disabled. 1. Press the Flash • Flash Auto Camera flash goes off automatically based on existing light conditions. • Force Flash The flash will engage with each shot even if there is enough available light to take the photo without flash. • Slow Sync.
White Balance Setting The White Balance Setting allows you to adjust the color temperature for different lighting sources to ensure the most accurate color reproduction. Follow the steps below to set white balance of the camera: 1. Press button to enter White Balance Menu. • AWB • Daylight • Cloudy • Fluorescent • Fluorescent CWF • Incandescent • Manual WB (Fully press the shutter button to detect the white balance value) • Color Temp.
Continuous Capture Setting Follow the steps below to configure the Continuous Shot Settings: 1. Press the • Cont.Shot-High Speed (VGA) Continuously capture using VGA pixel, up to 60pix/sec with a maximum of 120 images. • Cont. Shot- Fast (4M) Continuously capture 4MP images, up to 30pix/ sec with a maximum of 40 images. • Time-Lapse Take pictures based on the preset interval (30sec/1min/5min/10min). to enter the Continuous Shot Menu. 3. Press the menu. 2.
EV Setting The EV function menu of the camera includes functions, such as EV adjustment, shutter, aperture, etc. Using the appropriate function settings can improve your pictures. Exposure Compensation The exposure compensation feature allows you to adjust the light exposure value to control the brightness of the image. To select the best setting for optimum photos, follow these steps: 1. Press the button to display the settings screen. 2. Press the left/right arrow button to select the setting options.
ISO Shutter Adjustment The ISO function allows you to set the sensitivity of the camera's light sensor based on the brightness of the scene. To improve the camera's sensor performance in darker environments, a higher ISO value is required. A lower ISO value is needed when shooting in brighter conditions. You can adjust the shutter speed value. Selecting a higher shutter speed will capture fast moving objects more clearly. Selecting a slower shutter speed will result in some motion blur of moving objects.
Aperture Adjustment You can adjust the aperture size value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. Using Quick Recording In shooting mode, press the Recording short cut button begin recording video. After finishing, press the Recording short cut button or the Shutter Button to stop and store the video.
i Button Function Menu Mode: • Salon The Image Color Setting allows you to select different color effects. • Dreamy 1. Press the Menu. button to select the Image Color Setting 2. Press the left/right arrow button to select the Image Color Setting options. There are 4 Image Color options in Movie Mode • Normal • Vivid • Retro • Black and White : Refer to P29 for the color settings in Black and White Mode.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD screen: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD screen. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or on the SD memory card. 3. To play a selected video clip, press the the Movie Playback Mode. button to enter During video playback, the operating instructions will appear on the screen.
When playing a video, press the up/down arrow button to adjust the volume; when the volume reaches zero, appears. Thumbnail View When in Playback Mode, rotate the zoom wheel counter clockwise to the position to display thumbnail images of the photos and videos on the screen. W Zoom Out 00:00:47 T Zoom In 00:01:23 1. Use the Zoom Button to switch between 3x3, 4x4 and Date Folder thumbnail display. 2.
3 Press button to select continuous shooting playback and date playback. Using Zoom Playback (for still pictures only) The Zoom Wheel can also be used during playback. This allows you to magnify photos between 2x to 8x. 1. Press the button to switch to Playback Mode. 2. Press the left/right button to select a picture to be zoomed in. 3. Rotate the Zoom Wheel clockwise to ( 4. Press the arrow buttons to select a picture or video clip to view and press the button to restore it to the original size.
Slideshow Continuous Capture Group Playback This setting allows you to view all the stored pictures as a slideshow. You can use this menu setting to playback a slideshow of a group of photos with continuous capture. 1. Press button to enter playback screen. 1. Press 2. Press button to enter slide option. 2. Press the left/right arrow button to select Cont. Group. 3. Press the left/right button to select slideshow playing or 「Cancel」 to return to the playback screen. 3.
Photos and Video Deletion In playback mode, press the down arrow button ( select your photos and videos. ) to To delete photos or videos: 1. Press the button to switch to playback mode. 2. Press the left/right arrow button to select the photos and videos to be deleted. 3. Press the down arrow button ( screen is displayed. 50 ) and the deletion 4. Press the up/down arrow button to select「Delete One」 or「Back」and press the button to confirm. Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Expo Metering (Exposure Metering) Mode: 1. In Photo Shooting Mode, press the Photo Shooting Menu. func menu button to enter the Use this setting to select the "target" size of the camera's field of view to be metered. 2. Press the up/down arrow button to select the Photo Shooting Menu to be set. 3. Press the left/right arrow button to select the Photo Shooting Menu to be set and press the button to confirm.
Size OIS The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality. This mode can help reduce photo blur caused by unintentional hand shake, low light or slow shutter speed. The bigger the number of recorded pixels is, the better the image quality becomes. As the number of recorded pixels lessen, you will be able to record more images on a memory card.
Cont. AF HDR Set Cont. AF used when you take pictures. Set HDR used when you take pictures. There are 2 options: There are 2 options: • Off • Off • On • On In Black and White, Panorama Mode, Face Beautifier, and SCN mode, HDR cannot be set.
Photo Shooting Setting Menu Quality Mode: button in Photo Shooting Mode and press the 1. Press the up/down button to select . func menu The Quality Setting can be used to adjust the image compression ratio. There are three options for picture quality: 2. Press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4.
AF-Assist Beam Date Imprint In a darker environment, AF Assist Beam can be turned on for better focus. Include a Date/Time stamp on the photo image. • Off Digital Zoom Turn on or off the digital zoom.
Quick Review Custom Settings This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time. Custom Settings stores the current photo shooting mode and its parameters. The stored mode and parameters are directly invoked in Custom Settings mode.
Movie Menu Expo Metering (Exposure Metering) Mode: 1. Turn the mode dial, select the button to enter the Movie Menu. mode and press the func menu Use this setting to select the "target" size of the camera's field of view to be metered. There are 3 options: 2. Press the up/down arrow button to select the Movie Menu to be set. 3. Press the left/right arrow button to select the Movie Menu to be set and press the button to confirm.
Image Pixel When 1280x720 60fps and 640x480 120fps are selected for animation video, the focal distance is 1.5 times of that of other video sizes. Set the image resolution used during video recording. VIS This mode can help reduce photo blur caused by hand shake, low light and slow shutter speed. The speed requirements for reading and writing high image pixel images to SD card are as follows: No.
Movie Setting Menu Digital Zoom Mode: Turn on or off the digital zoom. 1. Turn the Mode Dial and select recording screen. to enter the video 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. func menu 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Select the items to be set and press the right arrow button to enter the menu. button or the 5.
Playback Menu HDR Mode: button to display the playback screen and 1. Press the press button to enter the menu. With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. 2. Press the up/down arrow button to select the playback to be set and press button to enter. 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. 3.
Red-Eye Reduction Rotate 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. You can use this setting to change the orientation of the picture. 2. Press the button, select the settings, and press the button to display the settings screen. func menu 3. Press the left/right button to select Touch-up or 「Cancel」 to return to the playback screen. 1. In Playback Mode, press the left /right arrow button to select the photos to be edited.
Resize This setting allows you to resize a picture to a particular resolution and saves it as a new picture. 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. 2. Press the button, select the settings and press the button to display the settings screen. func menu 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. button, select the settings, and press 2. Press the the button to display the settings screen. func menu 3.
Playback Setting Menu Protect Mode: 1. Press the button to show the playback screen, press the button, and press the up/down button to select . To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. func menu 2. Press the button to enter the menu. To lock or unlock the photo and video files: 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 1.
2. Press the up/down arrow button to select the sub-menu and press the button or right arrow button to show the settings screen. Delete You can delete one or all photo/video files. There are 3 sub menus available: • One: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • All: Lock all photos or videos. • Reset: Cancel all locked photos or videos. 3. Press the up/down arrow buttons to select an option and press the button to confirm.
3. Press the up/down arrow buttons to select an option and press the button to confirm. The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. DPOF (Digital Print Order Format) The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the SD memory card to print without having to individually specify the photos you want to print.
Trim The Trim Setting allows you to crop photos and save them as new pictures. 1. Press the up/down arrow button to select「Trim」and press the button or right arrow button to enter the menu. 2. Select「Yes」to confirm trim. Select a part to be trimmed using the zoom lever and arrow buttons to trim a photo. 66 3. Press the button and the「Save change?」prompt appears. Select「 」to change and save the picture. Select「 」to cancel changes and return to the trim prompt screen.
Setup Menu Mode : 1. Press the button in any mode and press the up/down button to select . func menu 2. Press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select the item to be set and press the button or right arrow button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm.
Power Saver This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD screen and camera off automatically after a consecutive period of inactivity. 1. Select「Power Saver」in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the up/down arrow button to select an option. 3.
Zone The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD screen while you are abroad. 1. Select「World Time」in the basic settings menu. The World Time screen appears. 2. Press the up/down to select the departure place ( and destination ( ) fields. ) 3. Press the left/right arrow button to select a city located in the same time zone as that of the field. Press the button to confirm settings.
Note that when you perform the Format Memory function, it only formats the active memory. If an SD memory card is inserted, the SD memory card is active and will be formatted. If there is no SD memory card, the internal memory is active and the internal memory will be formatted. Formatting the SD memory card will not automatically format the internal memory. Copy to Card Use this setting to copy the files stored in the internal memory to an SD memory card. 1.
Reset FW Version Use this setting to restore the camera to its original factory default settings. Use this setting to view the current camera firmware version. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. func menu 2. Press up/down arrow button to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow button to select「Reset」and press the button or right arrow button to enter the menu. 1.
CONNECTIONS Connecting to a Computer You can use a USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. The computer will automatically detect the camera as a removable drive.
Video System Use this feature to switch the video system from either NTSC or PAL. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. func menu 2. Press up/down arrow button to select and press the button or right arrow button to enter the menu. 4. After the transmission is complete, disconnect the USB cable according to the instructions specifying how to safely remove USB devices. 3.
The video output signal can be switched to NTSC or PAL to accommodate different regional TV standards. The appropriate setting will vary between regions. NTSC: USA, Canada, Taiwan, Japan, etc. PAL: Europe, Asia (excluding Taiwan), Oceania, etc. Note: The TV output will not display properly if an incorrect video system is selected. Set Eye-Fi SD Card Connection Mode This camera supports wireless connection of an Eye-Fi SD Card.
Supported HDMI Connections HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Connecting HDMI-Ready TV Direct transmission of digital video signals to your TV reduces conversion loss and improves image quality. 2. The camera will be automatically detected by the TV. 1. Use a High-Definition output terminal cable (optional) to connect your camera to an HDMI compliant TV. 3.
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner's manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied USB cable, without the need for a PC.
Connecting to your Printer 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge Menu will appear. Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」and the screen as shown below appears. Press the up/down arrow button to select a menu item and press the button or right arrow button to enter the item.
3. Press the up/down arrow button to select the number of copies for the currently displayed photo. Print (without Date) 4. Press the 1. In the PictBridge menu, select「Print (without Date)」and the screen as shown below appears. button and the following screen will appear. 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. Use this setting to print the photos without dates on them. 2. Press the left/right arrow button to select a photo to be printed. 3.
Print Index You can print all photos in the camera via this function. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 65. Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen. 1. In the PictBridge menu, select「Print DPOF Images」and the screen as shown below appears. Disconnect the USB cable from the camera and printer. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
APPENDICES Specifications Design and specifications are subject to change without notice. Active Image Sensor Pixels 14.41 Megapixels Total Image Sensor Pixels 15.40 Megapixels [1/2.3"CMOS] Lens 82 Focal Length 4.7mm (Wide) — 122.2mm (Tele) [35mm film equivalent] [26mm (Wide) — 676mm (Tele)] F number F3.2 (Wide) — F5.6 (Tele) Lens Construction 10 groups 14 elements Optical Zoom 26x Focusing Range Normal: (Wide) 23.6in. ~ ∞ / 60cm ~ ∞, (Tele) 86.6in. ~ ∞ / 220cm ~ ∞; Macro: 0.4in.
Number of Recording Pixels Still Image 14MP: 4320×3240, (3:2)12MP: 4320×2880, (16:9)10MP: 4320×2432, 8MP: 3264× 2448, 5MP: 2592×1944, 3MP: 2048×1536, (16:9)2MP: 1920×1080, 0.3MP: 640×480 Movie 1920×1080 (30fps), 1280×720 (60fps), 1280×720 (30fps), 640×480 (30fps), 320×240 (30fps) High-Speed Movie: 640×480 (120fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image Exif 2.2 (JPEG) Movie Movie Format: MOV (H.264), Audio: G.
LCD Display 2.
Flash Flash Method Pop-up Flash Modes Auto, Red-Eye Reduction, Forced Flash, No Flash, Slow Synchro, Red-Eye Reduction + Slow Synchro Shooting Range (Wide) Approx. 11.8 ~ 295.3in. / 0.3m ~ 7.5m (ISO 800) (Tele) Approx. 47.2 ~ 173.2in. / 1.2m ~ 4.4m (ISO 800) Recording Media Internal Memory: Approx. 25MB SD/SDHC Card (Up to 32GB Support) [Nonsupport MMC Card] Other Features PictBridge, ExifPrint Support, Multi-Language Support (25 Languages) Jacks AV-OUT/USB 2.
Prompts and Warning Messages Message 86 Description Action Warning! Battery exhausted. The camera battery is used up. It is a warning indicating that the camera is going to shut down. Replace with new batteries. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn off the camera and restart it to reset the lens. Suggest using tripod.
Message Description Action Image cannot be saved, improper alignment. Please try again. The saved panoramic pictures cannot be stitched. Retry taking the panoramic picture. The message will disappear after 2 seconds. Firmware update failed. The camera cannot be updated during the firmware update process. The camera will shut down in 2 seconds. Firmware version mismatch. The firmware version does not match during the firmware update process. The message will disappear after 2 seconds.
Message Action Write Protect ! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. The message will disappear after 2 seconds. Card Full ! Indicates that the SD card is full. Replace SD card with another that has available memory. The message will disappear after 2 seconds. Memory Full ! Indicates that the camera memory is full. It disappears after 2 seconds. During power-on, the SD card cannot be recognized or a read/write error occurs. Format the SD card.
Message Description Action This image cannot be edited. The file format does not support editing or the edited file cannot be edited again. The message will disappear after 2 seconds. Exceeded maximum folder number. This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. The message will disappear after 2 seconds. Too many pictures for quick processing.
Troubleshooting Problem Camera does not turn on Possible causes Solution • The battery has been depleted. • Recharge the battery. • The battery is not inserted correctly. • Correctly reinstall the battery. Camera turns off suddenly during operation • The batteries have been depleted. • Recharge the battery. The picture is blurred • Carema shakes while taking a picture. • Turn on OIS feature. Images and video files cannot be saved • The SD memory card is full. • The memory card is locked.
Problem Possible Causes Solution Saving data to memory card is slow • Using a memory card below Class 4 may result in slower recording times. • Use an SD card with write Class higher than 4 to improve performance. Cannot write to the memory card • The SD memory card has been locked. • Release the write lock of the memory card or replace with another card. • The camera may experience trouble • Use an SD card with write Class higher than 4 recording HD movies to SD cards to improve performance.
http://www.ge.