Data Sheet

Block Diagram
About GE Intelligent Platforms
GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology
company and a global provider of hardware, software, services, and expertise in automation and embedded
computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers
a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods,
government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company
headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit
defense.ge-ip.com.
XVB602 Intel Core i7 Based VME Single Board Computer
Environmental
Level 1 Level B
Cooling Method Convection Convection
Conformal Coating Optional Standard
Operating Temp
(for upper limit – please
consult the manual)
0° to 55° C
(300 ft/m)
-20° to 55° C
(300 ft/m)
Random Vibration 0.002g
2
/Hz* 0.002g
2
/Hz*
Shock 20g** 20g**
*With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz
**Peak sawtooth 11 ms duration
Specifications (continued)
Serial Ports
•
Two 16550 compatible full duplex async serial ports
•
COM1 routed to front panel RJ45 (RS232/422/485)
•
COM2 routed to P2 (RS232/422/485) requires
transceivers [to convert from TTL] on RTM
•
Ports feature independent 16-byte FIFO supporting
baud rates up to 115 Kbaud
PMC/XMC Expansion
•
Site 1 is PMC (PCI-X up to 64 bit/133 MHz) and XMC
(x4 PCIe Gen 2, 2.5 GT/s) capable
•
Site 2 is PMC (PCI-X up to 64 bit/133 MHz) capable
•
Up to 3 additional mezzanine sites can be added via
the EXP237 (see EXP237 data sheet.)
Video
•
Provided via the integrated Intel Graphics Controller
•
VGA on front panel with DVI-I routed to P2 (for use
with ACC-0603 or ACC-0627)
•
Any 2 ports can be used for dual display operation
SATA
•
Two Gen 2 (3 GB/s) SATA ports to rear IO (P2)
•
Two optional Gen 2 (3 GB/s)/e-SATA ports to rear IO
(P0) available when P0 option fitted
GPIO
•
8 GPIO pins available when P0 option fitted -
software configurable
On-board hard drive
•
2.5” SATA hard drive or Flash disk can be optionally
ordered (precludes use of PMC/XMC site 2)
Front Panel Options
•
VME Standard
•
1101.10 front panel
Power Requirements
•
+5V (+5/-2.5 percent); Core i7 @ 1.06 GHz: 5A (typical)
to 8A (maximum); Core i7 @ 2.53 GHz: 8A (typical) to
12A (maximum)
•
Plus ±12V if required by mounted PMC module)
Watchdog/Timers/RTC/Temp sensors
•
Two 16-bit timers and two 32-bit timers – software
programmable and capable of generating PCI bus
interrupts
•
RTC 146818 compatible with Li
•
CPU die and Chipset die, software readable
Transition Modules and Product Combinations
•
ACC-0603
•
ACC-0627
•
EXP237 – Used via board-to-board connector
(precludes use of on-board PMC2)
Software
•
Support for Windows, Linux, VxWorks
GE Intelligent Platforms Contact Information
Americas: 1 800 433 2682 or 1 434 978 5100
Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact.
defense.ge-ip.com
©2011 GE Intelligent Platforms. All Rights Reserved.
All other brands or names are property of their respective holders.
Specifications are subject to change without notice.
10.11 GFA-xxxx