Installation guide

3
PARTS SUPPLIED:
■ Two #8 Phillips head wood screws, 5/8" long to
secure dishwasher to underside of countertop
(in literature package).
Installation Preparation
TOOLS YOU WILL NEED:
■ Phillips head screwdriver
■ 5/16" and 1/4" nutdriver
■ T25 torque driver (PDW__II only)
■ 6" Adjustable wrench
■ Level
■ Carpenters square
■ Measuring tape
■ Safety glasses
■ Flashlight
■ Bucket to catch water when flushing the line
■ Gloves
For New Installations Only:
■ Tubing cutter
■ Drill and appropriate bits
■ Hole saw set
MATERIALS YOU WILL NEED:
■ Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supply)
■ Thread seal tape
■ UL Listed wire nuts (3)
Materials For New Installations Only:
■ Air gap for drain hose, if required
■ Waste tee for house plumbing, if applicable
■ Electrical cable or power cord, if applicable
■ Screw type hose clamps
■ Strain relief for electrical connection
■ Hand shut-off valve
■ Water line 3/8" min. copper
■ Coupler for extending drain line, if applicable
2 Wood Screws
Hand
6KXW2ȹ
Valve
90° Elbow,
Ferrule and
Compression Nut
Thread
Seal Tape
Wire Nuts (3)
Hot Water LineElectrical Cable
(or Power Cord, if applicable)
Waste Tee
Coupler
Air
Gap
Screw Type
Hose Clamps
Strain Relief
Phillips
Head
Screwdriver
1/4" and
5/16" Nutdriver
Level
Carpenters
Square
T25 Torque
Driver
6" Adjustable
Wrench
Tubing Cutter
Measuring Tape
Safety GlassesFlashlight
Gloves
Bucket Hole Saw Set Drill and Bits