Dishwasher Installation Information

15
Installation
Stainless Steel Interior Dishwasher
• Install toekick slides to toekick support
brackets. Use slide stamped “L” on left and
“R” on right side.
• Align front and inner toekicks, matching
screw holes.
• Align toekick to second screw hole in
toekick slide as illustrated.
• Install color matched screws “E” through
the front of the toekick and into the toekick
slides. Do not tighten screws.
• Carefully, slide assembly back until it is
aligned with adjacent cabinetry toekick.
• Adjust the height of the panel by loosening
screws and sliding the front panel down,
even with the floor.
• Carefully, hold the door and open fully.
Ensure that door does not strike top of
toekick.
• Adjust toekick height if necessary.
• Tighten screws.
Step 11
Install
Toekick
Assembly
Step 12
Install
Side Trim
• Side trim filler strips are packed with this
dishwasher. If the cabinet cutout is wider
than the dishwasher, install the filler strips
on both sides of the dishwasher to cover
gaps.
• Open the door fully.
• Place side trim against dishwasher tub and
install 2 screws, loosely on each side.
• Adjust trim to correct width. Tighten screws.
Attachment Screws
Slide toekick out
Pull tab while
Pushing toekick in
Screw E
Screw B
Front Toekick Panel
Inner Toekick
Left Side
Toekick
Slide
Side
Trim