Installation guide

Design Information
PRODUCT DIMENSIONS
34"
Adjustable
to 35"
*Dishwasher model
ZBD7000 and
Chef'sWasher
model ZBD7005
require a 3/4"thick
custom panel and
will be24-3/4"
deep.
DISHWASHER MODELS
Traditional Built-In
ZBD6400 BB, Black- Accepts 1/4" or 3/4" custon_
panels
ZBD6400 WW White- Accepts 1/4" or 3/4" custoIn
panels
Trim Kits for models ZBD6400
• ZPF625W (white) or ZPF625B (black) custmn panel
kits, supports a 1/4" thick custon/door panel.
• ZPF675W (white) or ZPF675B (black) custom panel
kits support a 3/4" thick custom door panel.
Traditional Built-In
ZBD6500 SS, Stainless steel door
Professional Series
ZBD6600 SS, Stainless Steel
Fully Wrapped
ZBD6700 BB, Black
ZBD6700 W_% White
ZBD6900 SS, Stainless steel with black controls
Fully Integrated
ZBD7000 lI, Requires custoln panel and handle
ZBD7100 SS, Stainless steel with tubular handle
CHEF'S WASHER MODELS
Professional Series
ZBD66{}5 SS, Stainless steel
Fully Wrapped
ZBD6905 SS, Stainless steel
Fully Integrated
ZBD7005 lI, Requires custoIn panel and handle
ZBD7105 SS, Stainless steel with tubular handle
ADVANCE PLANNING
• These dishwashers are designed flw versatility,
adaptable to vh'tually any installation.
• All models have a fldl length door or a modified
door to accept a fldl cabinet panel without the
traditional access panel
• Side tub flange trim is ac!justable and will conceal
any slight gap between the dishwasher and ac!jacent
cabinetry.
• These dishwashers may be installed beneath
cotmtertops {)f st{me or other materials that will not
accept screws. No trhn kit requh'ed.
Standard installation in 24" deep cabinets
• In standard 24" deep cabinets, the dishwasher door
will be flush with ac!jacent cabinetry.
• Models with 3/4" thick custom door panel will tit
flush with ac!jacent cabinetry.
Supplied or Custom Toekicks
• A 2-piece toekick is supplied with all models. The
toekick is height and depth a(!justable.
• Depending on cabinetry style, a custom toekick can
also be installed to match cabinetry. Care must be
taken to assm'e door swing clearance above the
toekick.
• A notched continuous toekick may be necessary to
allow a hmg door panel, on models ZBD7000 and
ZBD7005, to swing back and under the dishwasher.
ADA-Compliant
Installation below 34" high countertops
A reduced height installation (32-1/2" rain.) beneath
a 34" countertop, can be accomplished by removing
the fl'ont leveling legs. The rear legs should be
screwed in flush with the bottom support, as shipped.
The fl'ont of the dishwasher illtlst be shimmed to
level the dishwasher. }%:ater and electrical must be
routed through the back wall.
• All models are ADA-Complimm Models ZBD7000
and ZBD7005 oilier even nlore installation and
design flexibility because the required custom door
panel may be sized ti'om 26-1/4 to 30-1/4" height.
See page 9 for details.