Manual

Control Panel- ZBD7005 & ZBD7105
(k(_f's 1.17_:,k er
Yolt ( (l?g [o( at(¢
your model
number o, the
inside upper
tub jla,g'e.
Throughout this
manual, ,fi_ature,s
and appeara,ce
may vary .)ore
your model.
Cont"7:oI
Settings
ZBD7005 & ZBD7105
] CycleSelections [
D
1. Cycle Selections-The light on the selected pad will illmninate to indicate which cycle has been
selected.
HI)_VY DUTY For pans or cookware with dried-on or baked-on soils.
This cycle I/la_ IlOt i'ell/O_,e SOi/le btlI'Iled-oIl toods.
NORMAL WASH For loads of everyday cookware with medimn soils. NOTE: For heavily soiled
cookware, choose NORMAI, _4;_SH plus HIGH water temperatm'e option.
LIGHT WASH For lightly soiled cookware or recently used, lightly soiled cooking utensils
and cookware to be washed in a short time.
RINSE ONLY For rinsing partial loads that will be washed later. Do not use detergent with
this cwle.
2. WATER TEMP-This button provides extra heat options to increase water temperature fl)r
optimmn perti)rmance.
NORMAL This is the defimlt setting-provides a wash and rinse with water temperatures
up to 125°F (51 °C) in I,IGHT X,\;__SH, 135°F (57°C) in the NORMAl, X&;__SH
cycle and 155°F (68°C) in HEAVY DUTY.
HI TEMP
SANITIZE
This water temp selection provides a wash and rinse with water temperatures
up to 160°F (71°C) in I,IGHT _4;__SH, NORMAl, WASH and HEAVY DUTY.
This water temp selection provides a sanitizing wash and rinse with water
temperatures up to 160°F (71°C) in I,IGHT _,\;__SH and 171°F (77°C) in NOPdMAI,
_4;__SH and HEAVY DUTY. This selection cannot be used with RINSE ONI,Y.
At the end of the wash cycle, the SANITIZE OPTION light will remain
illmninated to indicate that the sanitization conditions have been met.
NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-Type Pots
and Pans Washing Machines (NSF Protocol P180) Requirements for
cleaning and sanitization of cookware.
NOTE: NSF certified residential dishwashers are not intended lot licensed tood establishments.
3. SMART DRY-_'hen selected, sensm_ detect the presence of rinse aid and the final rinse
temperature. The drying heater and tim are then turned on for the minimmn time to achieve
optimmn drying results, sa;'ing energy over conventional heated dry and time over non-heated
dry: SMART DRY is not available on RINSE ONI,Y.
12