Installation guide

Installation instructions
REVERSE THE DOOR SWING (cont.}
Reverse the hinges:
• Using a flat putty knife, remove the screw hole plugs
opposite the door hinges, top and bottom. Set aside.
• Remove the two screws holding top hinge.
• Turn the hinge upside down, with the hinge pin
pointing up. Reinstall the hinge on the opposite side
at the bottom of the door.
Remove the bottom hinge. Turn the hinge upside
down and install on the opposite side atthe top.
• Push screw hole plug buttons (supplied) into the
original screw holes.
Remove the top hinge pin.
Place plastic hinge sleeve on the bottom hinge and
position the door onto the pin.
• Place plastic hinge sleeve in the top hinge hole on
the door. Align the door on the bottom hinge and
replace top hinge pin.
Reinstall handle with original screws.
Top Hinge _ HingePin
HingeSleeve/
DoorStop
Hex Head Hinge Screw
BottomHinge
"O
Phgs_ "_
J
J
Hin_
""" ""_-'_ Hex Head
_ Hinge Screw
" 22eS' eve/
_"--Hinge Pin
Top Hinge
REVERSE THE DOOR SWING (cont.)
To reverse the door catch:
• Remove the plastic screws
from the opposite side
of the door.
• Remove the metal screws
from the magnetic door
catch and reinstall on the
opposite side of the door.
• Install the plastic screw
into place on the opposite
side of the door.
I
Reverse
Door Catch
Position
Bottom Hinge
_8