Manual

Built-In Dimensions
Ouldoor/I_door Rr_/rigeralor
Installation
dimensions
Tile outdoor/indoor refrigerator can be
a free-standing model or can be 1)uih in
using the cut-out dimensions below.
233/4" 233/4"
(603mm) (603mm)
When building in the outdoor/indoor
refligeratot; be sure to allow for a flfll
door swing so you have fltll access to the
pull-out fltll extension drawers.
See the Installation Instructions (Pub. No.
31-51549) tbr complete directions.
Product dimensions:
Height with
canopy: 36" (914 nnn)
Height without
canopy: 341/2" (876 mm
Width: 93:%" (603 mm
Depth: 23:%" (603 nnn
NOTE:
Handle and
handle standoff
depth is 9:%"
Cut-out dimensions:
Height: 341/_" (876 ram) minimum
Width: 23_%" (603 ram) minimun_
Depth: 24" (610 nnn)
7bp canopy
removal
The top canopy may be remoxed when
installing under a countertop.
The door MUST BE closed when
removing or replacing the top canopy.
To avoid damage, the top canopy must
cleat the left hinge center locking plate
and right hinge.
• Remoxe the 3 screws flom the back of
the top canopy (A).
• Using heaxy-duty work gloxes, lift up
on the top canopy back (B) and slide
it forward until it unlatches from the
unit (C).
• I,ift the top canopy up and off of
the unit.
NOTE: Kee I) the top canopy and screws
for flmtre flee-standing installations.
NOTE: When installing the unit in a
flee-standing configuration, the top
canopy nmst be left in place.
(A)
(B)
ROTE:Door MUST BE
closed before removing or
replacing the top canopy.
(c)
CAUTION: Underside edges
of the stainless steel canopy top may be
sharp. _:ear hea_w-dutv work gloxes when
moxing the top.
14