Installation guide

Installation Preparation
STEP 2 MOVE THE RANGE INDOORS
1 Tilt the range forward on the skid.
_Toekick
2 Lift the toekick out of the foam base.
4 Attach the hand-truck straps around the unit.
IMPORTANT: Place the hand-truck strops below
the oven door handles. To ovoid damaging the
side ponds, place a pod between the hand-truck
and the range.
5 Tilt the range to lower the hand-truck wheels
off the skid.
Hand-Truck
StrapsBelow
OvenDoor
Handles
,_,_" _i_I
, ,,J
3 Drive the blade of the hand-truck beneath
the foam block.
6 Place the appliance runners on the floor
at the left and right sides in front of the opening.
IMPORTANT: The runners provide a surface for
rolling the range into the final position and will
protect the floor finish. The runners must be
removed before leveling the range.
7 Hove the range indoors. Position the range
in front of the installation location, onto
the runners.
InsertBladeUnder
the FoamBlock
Youmayneedto removethe front
of the foamblockto fit through
the doorway.
IMPORTANT: Do not remove the base foam
block while the hand-truck is in use. Place
the hand-truck blade underneath the bose
foam block and transport the range to the final
location.
Range
Opening
Runners
for Rolling
the Range
Position
12