Installation guide

Installation

ACCESSORIES--TOEKICK Iprovided)

• Install the toekick after the range has been leveled.

• Measure the distance between the floor

and the bottom of range.

• Loosen the two screws on each end. Adjust

the toekick height bg sliding the upper and lower

pieces apart to 1/8" less than the measured height.

• Secure the top and bottom sections bg tightening

the 2 screws on each end.

• Push toekick against range leg until clip snaps

to legs.

NOTE: Be sure the toekick snaps securelg to the leg.

Topof

Toekick

Bottom

of Toekick

Screw

Push