Installation guide

Installation Instructions
Pre-Installation Checklist
THE FOLLOWING PAGES IS TO BE ill
USED FOR SINGLE AND DOUBLE ill
OVEN INSTALLATION! JJ_
Remove packaging materials.
Check behind hinges, and under
false bottom. Remove labels on the
outside of the door, plastic on trims
and panel, and all tape around oven.
]
Oven Racks
Broiler Pan Literature
and Grid Pack
Open oven door and remove literature
pack, broiler pan and grid, and oven
racks.
Remove Installation Instructions from
literature pack and read them carefully
before you begin.
Be sure to place all literature, Use and
Care, Installations, etc. in a safe place
for future reference.
Door Removal is not a requirement for
installation of the product, but is an added
convenience.
Open the oven door as far as it will go.
Push both hinge
locks down toward
the door frame, to
the unlocked
position. This may
require a flat blade
screwdriver.
Place hands on
both sides of the
door, close the oven
door to the removal
position this is half
way between the
broil stop and fully
closed..
Hinge
_. Unlocked
e s,,,on
Hinge
Arm
Hinge
/ Clears
Slot
3 (Continued on following page)