Installation guide

Installation Instructions
Electrial Connections cont.
NEW CONSTRUCTION AND
FOUR-CONDUCTOR BRANCH
CIRCUIT CONNECTION
• When installing in a new construction,
or
• When installing oven in a mobile
home, or
• When local codes do not permit
grounding through neutral:
a. Cut the neutral (White) lead from the crimp.
Re-strip the neutral (white) lead to expose the
proper length of conductor.
OR
Three-Conductor Branch
Circuit Connection
When connecting to a 3-conductor branch
circuit, if local codes permit:
a. Connect the bare oven ground conductor
with the crimped neutral (white) lead to the
branch circuit neutral (white or gray in
color), using wire nut.
Junction
Box Cover
Ground
Wires
b.Attach the appliance grounding lead (green
or bare copper) in accordance with local
codes. If the residence grounding conductor
is aluminum, see WARNING note.
c. Connect the oven neutral (white) lead to the
branch circuit neutral (white or gray) in
accordance with local codes, using wire nut.
d.Connect the oven red lead to the branch circuit
red lead and the oven black lead to the branch
circuit black lead in accordance with local
codes, using wire nuts. If the residence red,
black or white leads are aluminum conductors,
see" WARNING" note on preceeding page.
e. Install Junction Box Cover.
Ground
/ Wires
Ground and
neutral wires
_ Junction
Box Cover
b.Connect the oven red lead to the branch
circuit red lead, using wire nut.
c. Connect the oven black lead to the branch
circuit black lead in accordance with local
codes, using wire nut. If the residence red,
black or white leads are aluminum
conductors, see "WARNING" note on
preceeding page.
d. Install Junction Box Cover.
9