Use & care guide

Step 2
Install
base pan
Installation
Microwave Oven
Note: Do not tighten screws until all screws are started.
•Install side cover by inserting bottom
between oven and base pan.
•Start two screws A, through side cover and
two screws E, through the cover on top into
holes where buttons were removed.
•Install other side cover with screws A.
•Install other top screws E.
•Tighten all screws.
•Remove screw located on the top left of the
back of the oven. Retain screw.
•Remove the four top plug buttons from the
top of the microwave oven cabinet.
•Remove any protective film on oven cabinet.
•Place the microwave oven on the base pan
centered left to right.
9
Screw E
Screw A
Remove 4 Plug Buttons
V Notch
Remove and
Save Screw
Step 3
install
side covers