Manual

Cooktop Burners
Professiona! Outdoor Grills & Cooktops
Cooktop
burners
Ion some models
Some grills have cooktops with two surface
burners. Each surface burner is rated at
15,000 BTUand has a spark igniter for efficient
lighting.
The burner grates are cast iron for durabilitg.
The two (2)center sections are reversible,
allowing the use of a wok.
Each cooktop comes with a stainless steel cover
which doubles as a work surface. When using
the grill main burners with the side burner
cooktop cover in place, heat can conduct from
the grill section and causethe cooktop cover
to heat up and become too hot to touch.
Allow to cool before removing.
Never attempt to light the cooktop burners
with the cooktop cover in place.
Cover the cooktop burners with the stainless steel
cover when not in use.
>Grates(reversible
for wok cooking)
Frame
To light a
cooktop
burner
Ion some models
First remove the cooktop cover and ang cooking
utensils from the cooktop grates.
CAUTION:
The cooktop cover may be hot if the grill burners
have been in operation.
Push and turn the control knob to the LITE
position until the burner is lit or 4 seconds pass.
If the burner doesn't ignite, wait 5 minutes for
ang accumulated gas to dissipate; then trg again.
If the burner will not light after several attempts,
wait 5 minutes. The burner can be lit bg holding
a lit match next to the burner ports and turning
the control knob to the LITEposition.
BACK FRONT
Flame
height
The correct height of the flame depends
on the size and material of the pan being used,
the food being cooked and how much liquid
is in the pan.
The flame should never extend begond
the bottom of the pan.
Pans that conduct heat slowlg (such as glass-
ceramic) should be used with low or medium
flame unless gou are cooking with a large
amount of liquid.
Correct Incorrect
JF-k
Nete: Theflamesizeon a gasburnershouldmatchthe cookware
youare using.
17