Installation guide

Installation Instructions

[STEP 9] INSTALL FRAMED PANELS

(TRIMMED MODELS ONLY)

Right hand models shown. Use the same instructions

for left hand models.

IF YOU ARE INSTALLING OVERLAY PANELS,

GO TO STEP IOA.

!! useFr0ntH0es

to SecureTrim

RearHoles

to SecureHandle

Install Door Panel:

• Open the door to 90°. Remove the 6 Phillips head screws

from the door handle.

• Remove the handle. Retain all screws.

• Remove the 6 screws holding the trim, lift off the trim.

Retain the screws.

• Slide the framed panel into the door trim.

Handle

Trim

DoorTrim

Door

k\\\\\\\\\\\\\\\\\\\%/

Standardsuppliedhandleshown

in 1/4"panel position.

• There are two sets of holes in the handle side trim.

Replace the handle side trim by installing the original

screws in the FRONTscrew holes.

• Secure the handle to the door using the REAR

screw holes.