Manual

Operating Instructions
I¢_/rit_'erator/Freezer
Set the
temp_ ature
control
WHEN YOU FIRST TURN THE
REFRIGERATOR/FREEZER ON,
SET THE CONTROL AT 5.
9 is tile coldest setting, 1 is tile wannest.
For colder or waYiner teillperattlres, a(!itlst
tile control one nt/Illbev }It }1 tiIlle.
IMPORTANT: When first setting the control,
or adjusting it, allow 24 hours for the
refrigerator/freezer to get cold.
NOTE: Turning the control to the OFF
position stops cooling in the refrigerator/
freezer, but does not shut off power to
the refrigerator/freezer.
(_5 IS NORMAL
9 IS COLDEST
How to test
temp_atures
Use the milk test for the refrigerator. Place a
container of milk on tile top shelf. Check it a
day later. If tile milk is too warm or too cold,
a@_st tile temperature control.
Use the ice cream test for the freezer. Place
a container of ice cream in tile center of the
fl'eezer. Check it after a day. If it's too hard
or too soft, a@_st tile temperature control.
Always allow 24 hours for the refrigerator/
freezer to reach the temperature you set.