Instruction Manual

24
D
GB
F
E
I
Ru
09637-11.2014-DGbFEIRu
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 03
for using the compressors within the European Union
(inaccordancewithLowVoltageDirective2006/95/EC)
We hereby declare that the following refrigerating compressors
Productdesignation: HG22P
comply with the Low Voltage Directive 2006/95/EC.
Appliedharmonisedstandard:
EN60034-1:2010
EN60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(inaccordancewithMachineryDirective2006/42/EC)
Themanufacturer: GEABockGmbH,Benzstraße7
72636Frickenhausen,Tel.:07022/9454-0
hereby declares that the refrigerating compressor HG22Pcomplieswiththebasicrequirements
of Appendix II 1B of the Machinery Directive 2006/42/EC.
Appliedharmonisedstandard:
EN12693:2008andthecorrespondingstandardsreferenced
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulationsoftheMachineryDirective(2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryonrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Appendix VII Part B.
Personresponsiblefordocumentationis:WolfgangSandkötter,Benzstraße7,72636Frickenhausen.
Frickenhausen,01.11.2011 ppa.WolfgangSandkötter,
ChiefDevelopmentOfcer