User's Manual

Installation:

NOTE: The pictures shown in the User’s Manual are for demonstration purposes only. Your computer or product may look slightly different.

1. Open the Power Cable Storage cover located on the back of your Cooler Pad. Take out the USB Power Cable and the Height

Adjusting Knobs, and then replace the cover.

2. Connect the USB Power Cable to the DC 5V Power Connector located on the side of your Cooler Pad, and then connect the

other end into an available USB port on your notebook.

3. Place your notebook on your Cooler Pad.

4. Turn on your notebook, and then turn on your Cooler Pad using the Cooler Pad Power Switch.

5. To adjust the speed of the fans on your Cooler Pad, use the Fan Speed Scroll Button on the front of your Cooler Pad (NOTE: L

represents low and H represents high).

6. Your Cooler Pad is now ready to be used.