Digital Photo Frame 10.4” LCD Model #:10-4DPF200 User’s Manual PID 161299-109240 Rev.
All brand name and trademarks are the property of their respective owners USER’S RECORD: To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual.
PACKAGE CONTENTS: Your new Digital Photo Frame will ship with the following items. - 10.4” LCD Photo Frame(1 Black Acrylic and 1 Wood Frame) - USB Extension Cable - Power Adapter - Remote Control - User’s Manual & Warranty Information SYSTEM SPECIFICATIONS: Your new Digital Photo Frame complies with the following specifications. - Screen Dimensions: 10.
HARDWARE DESCRIPTION: Display Screen Remote Control Switching Power Adapter USB Cable CF Card Slot USB mini-B port (For connecting to computer) SD/MMC/MS Card Slot USB mini-A port (For connecting flash drive) 3.
Remote Control EXIT Press to go back to the previous screen. ZOOM Press to zoom in. SETUP Press to open the “Setting” menu. Press to rotate the photo counter-clockwise 90 degrees MENU Press to open the operation mode menu. ENTER Press to select an option, to save a changed setting in the setup screen, or to open the control menu of a photo or movie. Press this button to turn off the alarm. Press to navigate left and right or pan to a photo’s right or left after a photo has been zoomed in.
HARDWARE INSTALLATION: 1. Connect the power jack of the enclosed Switching Power Adapter to your Digital Photo Frame, and plug the other end into an electric outlet. 2. Pull out the photo frame stand at the back of your Digital Photo Frame, and place your Digital Photo Frame on a flat and steady surface. 3. Your Digital Photo Frame is now ready to be used.
USING THE DIGITAL PHOTO FRAME: 1. Make sure that you have properly connected the Switching Adapter; refer to the Hardware Installation instructions above if necessary. 2. Carefully insert your memory card into the proper slot as shown below following the orientation guide on the memory card. 3. Turn on your Digital Photo Frame and the operation mode menu will appear. Select this function to view photos. Picture Select this function to play music.
4. Use the enclosed Remote Control or the Built-in Control and select either “Picture”, “Music”, “Combo”, or “Movie”, the following screen will show. 5. Select the memory that you wish to view your files from, then press “Enter” and “Exit” on the remote control or “E” button of the Built-in Control to navigator through the files and folder of your memory card or USB flash drive. 6.
Music control menu Rewind Previous Fast Forward Next Play / Pause Playing mode indication Stop Playing Information File Information Movie control menu Rewind Fast Forward Previous Next Playing mode indication Play / Pause Stop File Information Zoom in 7. Select the “Setting” icon of the mode menu or press the “Setup” button on the Remote Control to open the “Setting” Menu, the following option will show up to allow you to configure your digital photo frame.
CONNECTING TO A COMPUTER: 1. Make sure all memory cards have been removed from your Digital Photo Frame and your Digital Photo Frame is turned on. (Warning: Turning on the Digital Photo Frame after it has been connected to a computer can cause irreversible damage to you digital photo frame.) 2. Turn on your computer. 3. Plug the USB mini-B connector end of the enclosed USB Cable to your Digital Photo Frame. 4. Plug the USB-A connector end of the USB Cable into an available USB port on your computer. 5.
CHANGING THE OUTER FRAME: To properly change the outer frame for your Digital Photo Frame, please follow the instructions below. 1. Press the latch at the side of your Digital Photo Frame to separate the display screen from the outer frame. 2. Place the wooden outer frame on the surface of a clean and flat surface. Match the side of the photo frame that has the wider latch to the wooden frame to match the remote control sensor lens with the sensor of the photo frame. 3.
WARRANTY INFORMATION: Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship one year. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable.
