Laser Wireless Rechargeable Mouse Model #: LM8000WR User’s Manual Rev.
User’s Record: To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual.
Package Contents: Your new Mouse will ship with the following items. § § § § § § Laser Wireless Mouse USB Charger/Receiver Pad 2 AA Ni-MH Rechargeable Batteries User’s Manual Driver Software on CD Warranty Information System Requirements: Please be sure that you meet all of the system requirements below to avoid difficulties during installation.
Hardware Installation: 1. Connect The Wireless USB Receiver To Your Computer: a. Turn on your computer. b. Connect the Wireless USB Receiver into an available USB port of your computer. c. After Windows® has loaded, it will detect your USB device and the necessary drivers will be installed automatically. 2. Battery Installation: a. Remove the Battery Compartment Cover from the bottom of your Mouse. b.
3. Establish a Connection: a. Turn on the Power Switch at the bottom of your Mouse. Your mouse will establish a connection with the receiver and is ready for use. If a connection is not established, there might be a high level of surrounding interference, continue with the following instructions to establish a connection manually. b. Press the Connect Button on the bottom of the Wireless USB Receiver. c. Press the Connect Button on the bottom of your Mouse.
Recharge Your Mouse: 1. To recharge your Mouse, place it on top of the Wireless USB Receiver making sure the contacts are properly aligned. 2. Make sure the Wireless USB Receiver is connected to your computer, and then mount your Mouse onto the Wireless USB Receiver. 3. Turned on your computer. 4. Your Mouse will start charging and the Charging LED Indicator will turn on. Once the batteries are fully charged, the LED Charging Indicator will turn off.
Software Installation: Your Mouse comes with Wheel Mouse software which allows you to assign special functions to the 3 programmable buttons on your Mouse. To install the Wheel Mouse software, please follow the instructions listed below: 1. If you have installed any other mouse drivers/software for your computer, please uninstall them prior to the installation of the Wheel Mouse software to avoid any software conflicts. 2. Place the Driver CD into the CD-ROM drive of your computer. 3.
3. To configure the Scroll Wheel on your Mouse, click the “Wheel” tab. Options Wheel Mode Wheel Speed Descriptions System Default (Intelli-Mouse) Mode: Select this mode to apply only the Windows® default scroll wheel options. Enhanced Scroll Mode: Select this mode to apply the Wheel Mouse settings to your Wireless Presenter. Scroll # lines per scroll unit: Select this option, and then specify the number of lines to scroll each time you scroll the scroll wheel on your Mouse.
5. To configure the programmable buttons on your Mouse, click the “Programmable Button” tab. Options Button Selections Descriptions Click the drop-down menu for the button you wish to program and then select which of the preprogrammed functions to assign to that button. Function Description This box shows the description of the function you selected.
. . FCC Information: FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation.
Warranty Information: Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable.