User guide

9
Torque capacity
The Surgrip Casing Tong utilizes a different belt for each nominal diameter. The maximum
working loads are shown in the table below.
Diameter
Belt
Part
Number
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
36 SCTB3672-36 59.00 111,600 22,700
38 SCTB3672-38 60.00 115,000 23,000
40 SCTB3672-40 61.00 117,900 23,200
42 SCTB3672-42 62.00 120,900 23,400
46 SCTB3672-46 64.00 126,900 23,800
48 SCTB3672-48 65.00 130,000 24,000
56 SCTB3672-56 69.00 141,500 24,600
60 SCTB3672-60 71.00 146,700 24,800
72 SCTB3672-72 77.00 163,000 25,400
WARNING: Under no circumstances should the maximum working load be
exceeded. Always use a load cell or other calibrated indicating device to monitor
the line pull on the tong to avoid an overload.
.