Manual

12
Parts List
Item Qty. Part Number Description Notes
1 1 SCTH614H Handle
2 1 SCTJ614H Jaw
3 1 HP410 Jaw-handle pin
4 2 HXSR375 Spiral retaining ring Smalley WSM-375 (or equal)
5 2 HI09D Diamond point insert
6 2 HI09B Blank insert
7 4 HP904 Insert key
8 4 HS21 Insert key spring
9 1 HP411 Belt – jaw pin
10 2 HXSR212 Spiral retaining ring Smalley WSM-212 (or equal)
11 1 HP412 Latch pin
12 1 HH19 Hanger
13 2 HXS047 Hanger bolt ½-20UNF x 2 gr. 5
14 2 HXN062 Slotted nut ½-20UNF
14a 2 HXC008 Cotter pin 1/8 X 1 1/4
15 1 -------- Belt As required (see page 7)
16 1 HXL001 Lanyard Not shown
Wear Limits
The following table indicates limiting diameters on the components of the Surgrip Casing
Tong. When localized wear is beyond any one of the limits indicated, the component should
be replaced.
Part
Number
Description Location Limit diameter
HP410 Jaw – handle pin Pin body 3.720 (min)
HP412 Belt latch pin Pin body 3.220 (min)
HP411 Master pin Pin body 2.095 (min)
SCTH614H Handle Jaw pin hole 3.785 (max)
SCTH614H Handle Latch pin hole 3.285 (max)
SCTH614H Handle Load loop 2.750 (max)
SCTJ614H Jaw Handle pin hole 3.785 (max)
SCTJ614H Jaw Master pin hole 2.160 (max)