Operation Manual

industrial controls
®
industrial controls
®
2116
S
t
a
n
d
a
r
d
Function traffic light - RED Standard Function France
door closed 5 seonds 5 seonds
post illumination period post illumination period
door movement permanent RED 3 sec. prewarning by flashing,then
permanent RED during
doormovement
door in part open position permanent RED permanent RED
(not half or fully open)
Prewarning autom. closing function 3 seonds flashing 3 seonds flashing
If a malfunction is indicated by the red LED, it is signaled by flashing of the RED-traffic light,
if the Dip-Switch 1 is set in function „traffic light“.
traffic light - GREEN
door in position half open traffic light GREEN permanent traffic light GREEN permanent
(position of select switch)
a keep open time is set
or the timer has operated
door in position full open traffic light GREEN permanent traffic light GREEN permanent
(position of select switch)
a keep open time is set
or the timer has operated
Functions traffic light
Dip-Switches Comfort module - see backpage !!
Connecting of limit switches
The potential-free limit switches UP & DOWN are connected to the terminals 30 & 31 (UP)
and 32 & 33 (DOWN).
Connection limit switch UP
Connection limit switch DOWN
30
31
32
33
Connecting external push-buttons UP, STOP, DOWN
For the use from outside of the DC 3 an external switch (e.g. key-switch) can be connec-
ted. The pushbuttons UP and DOWN must have closing function. As the STOP function is
connected in the safety circle, it has to be connected as an opener. In case two 2x push-
buttons are connected, STOP inside and STOP outside must be switched in serial mode.
34
35 42
43
40 41
36
37 44
45
38 39
Push button module 1
push button UP
push button STOP
push button DOWN
Push button module 2
push button UP
push button STOP
push button DOWN
It is not possible to use the switch in case
of malfunction of a security device (Danger
area not visible) - optional, only if Comfort
module is connected 5V DC/
e.g. Schleifendetektoren.
The Danger area has to be visible, dead-
mans function is possible 24V DC/ e.g. 3x
push button.