Operation Manual

Programming of ROLLOTIMER Comfort - without S/D sensor
1. Enter programming mode
Press ▲ (UP) and ▼ (DOWN) simultaneously
for approx. 3 seconds.
2. Time of day
programming
Setting of the hour
18 : 32
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
18 : 32
Use▲ (UP) to set the minutes.
Press ▼ (DOWN).
Setting of the day*
18 : 32
0
Use ▲ (UP) to set the day.
- Every day the same automatic running time: value 0
- Every day individual automatic running time: set each day (1=
MO, 2=TU, 3=WE, 4=TH, 5=FR, 6=SA, 7=SU)
Press▼ (DOWN).
3. Automatic
opening day 1*
programming
Setting of the hour
18 : 32
1
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
18 : 32
1
Use▲ (UP) to set the minutes.
Press▼ (DOWN).
4. Automatic
closing day 1*
programming
Setting of the hour
18 : 32
1
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
18 : 32
1
Use ▲ (UP) to set the minutes .
Press ▼ (DOWN).
5. Repeat point 3 and 4 to set the automatic running times for each 7 days of the week, if the
idividual running times were selected in point 3.*
6. Operation Mode
setting
Use ▲ (UP) to set one of the following modes:
man = manual operation
auto = set automatic opening and closing time
var = a random generator changes the set
automatic opening and closing time by +/- 15
minutes
7. Exit programming
mode
Press ▼ (DOWN).
* In the weekly program (Day=0) the automatic closing and opening times for the blinds are the
same for every day of the week.
In the daily program ( Day 1...7) you can separately set the automatic closing and opening
times for every weekday.
Note: setting of the values
The value which you want to set is selected by the DOWN button and is signaled by the flashing of
the value. The value itself is set with the UP button which is raised with every push.
The values are raised automatically by pressing permanently the button. If you have reached the
desired value, confirm it by pressing DOWN which will switch automatically to the next value for
programming.
The programming mode will be closed automatically, if there is no input for 30 seconds. All set values
until then are set and safed. Due to the premature closing of the programming mode, the operation
mode will be set to manual (man)
Operation of ROLLOTIMER
Push ▼ (DOWN) < 1 second Jog mode or STOP, if motor is running already
Push ▼ (DOWN) > 1 second DOWN command
Push ▼ (DOWN) > 6 seconds DOWN command +
time saved for DOWN command
Push ▲ (UP) < 1 second Jog mode or STOP, if motor is running already
Push ▲ (UP) > 1 second UP command
Push ▲ (UP) > 6 seconds UP command +
time saved for DOWN command
Push ▼ (DOWN) + ▲ (UP) < 1 second
simultaneously
Chance of operation mode
Push ▼ (DOWN) + ▲ (UP) > 1 second and < 3
seconds simultaneously
Activation of programming mode
Push ▼ (DOWN) + ▲ (UP) > 6 seconds
simultaneously
General reset
(restore factory settings)
Jog mode
To adjust the angle of the venetian blinds push the ▲ (UP) or ▼ (DOWN) button (up to 1 second).
The automatic mode (auto) remains unchanged.
Safety stop function
If the blind gets stopped, by pushing ▲ (UP) or ▼ (DOWN) while running in automatic operation
mode, the operation mode will switch to manual mode.
Quick programming
If the ▲ (UP) or ▼ (DOWN) button is pressed longer than 6 seconds, the blind is running in the
direction and the current time will be saved as the automatic ▲ (UP) or ▼ (DOWN) command time
(memory function).
Operation modes
Manual mode man
Automatic mode (daily program) auto
Vacation mode: automatic + random generator var
You can enable the manual mode (man) by pushing the ▲ (UP) and ▼ (DOWN) buttons
simultaneously.
Repeating this, it will be switched back to the original mode (auto or var).
The activation of the automatic mode (auto) will open and close the blinds according to
programmed times.
The activation of the vacation mode (var) will open and close the blinds according to the
programmed times with a randomly generated shift of +/- 15 minutes.
The blinds can be open and closed manually in any operation mode by pushing ▲ (UP)or ▼ (DOWN).