Operation Manual

Safety advice

Assembly, connection and maintenance of the device may only be executed by personnel trained

accordingly. Use for the installation of the Rollotimer a deep switch box. Please pay attention that no

cables are affecting the proper latching of the device. To prevent overvoltage and therewith a

malfunction, plug or unplug the operation panel only in de-energized state! For this purpose

disconnect the power supply of the electric circuit by switching off the corresponding fuse.

Technical Data Ref. No. 941.DCZ2.00

Power supply 230V / 50Hz

Switching voltage 250 V AC

Switching contact load 3 A (cos phi=1)

Ambient temperature +5°C to +45°C

Running time 2,5 minutes (max.)

Changeover delay min. 0,5 seconds

Accuracy < 5 seconds /day

Power reserve approx. 0,5 minutes

Protection class IP 20

Safety class II

Conformity CE

Installation and

operation manual

ROLLOTIMER Standard

Ref. No. 941.DCZ2.00

PE green/yellow

N blue

L black/brown

blue

brown or black

blue

brown or black

Connection diagram

N L N ZU AUF

N NL

down up

X0469

PAGE 1
Safety advice Assembly, connection and maintenance of the device may only be executed by personnel trained accordingly. Use for the installation of the Rollotimer a deep switch box. Please pay attention that no cables are affecting the proper latching of the device. To prevent overvoltage and therewith a malfunction, plug or unplug the operation panel only in de-energized state! For this purpose disconnect the power supply of the electric circuit by switching off the corresponding fuse.
PAGE 2
Programming of ROLLOTIMER Standard Press ▲ (UP) and ▼ (DOWN) simultaneously for approx. 3 seconds. 1. Enter programming mode 2. Time of day programming Setting of the hour 18 : 32 Setting of the minutes 18 : 32 3. Automatic opening programming Setting of the hour 07 : 20 Setting of the minutes 07 : 20 4. Automatic closing programming Setting of the hour 21 : 45 Setting of the minutes 21 : 45 5. Operation Mode setting Use ▲ (UP) to set the hour. Press ▼ (DOWN). Use ▲ (UP) to set the minutes.