Specification Sheet

ManualsBrandsGeberit ManualsShop All GeberitGeberit Duofix Support Brackets for Wall Mounted Toilets with Small Contact Surface

Optional Parts for

Geberit Duofix Carrier 111.335.00.5

ARCHITECT/ENGINEER APPROVAL

Job Name

Date Quantity

Model Specified

Variations Specified

Customer/Wholesaler

Contractor

Architect

Product Specifications

Installation accessories for concealed

tank and carrier for wall-hung toilet.

Accessories shall be for alternate frame

installation and connection sets between

carrier and toilet fixture.

Warranty

One-year warranty against

manufacturers’ defect.

Features

Installation accessories for:

• Pre-wall installation

• Corner installation

• Post-tension concrete floors

• Non-standard stud distances

• Fire protection element to DIN EN 1364-1

• Supports for short height wall-hung bowls

• Connection set for 1" seat height offset

• Sound dampening pad

• Alternate bolt caps

• Finished wall thicknesses to 7.09" (18 cm)

Waste fittings options for:

• Straight back

• Left hand or right hand runs

• Cast iron 90

• Back to back vertical or left hand/right hand

runs

Mounting Accessories

Description Model No.

Frame to wall anchoring for 5.125”-7.875” (13-20 cm) thick 111.815.00.1

unfinished pre-wall

Frame to wall anchoring for 5.125”-7.875” (13-20 cm) thick 111.835.00.1

unfinished pre-wall corner installations

Support brackets for wall-hung toilets with small contact 111.847.00.1

surface (thin profiles)

Fire protection set for Sigma concealed dual-flush tanks; 90 min. 111.863.00.1

fire resistance to DIN EN 1364-1:1999-10

Frame to wall anchoring where foot installations into floor are not 111.867.00.1

allowed for 5.125”-7.875” (13-20 cm) thick unfinished pre-wall

Frame to stud fastening set for extended stud spacing 111.869.00.1

from 19.75”-25.56” (50-65 cm)

Frame to wall anchoring extensions for 7.875”-15.75” (20-40 cm) 111.887.00.1

thick unfinished pre-wall

Summary of content (2 pages)

PAGE 1
Optional Parts for Geberit Duofix Carrier 111.335.00.5 Product Specifications Installation accessories for concealed tank and carrier for wall-hung toilet. Accessories shall be for alternate frame installation and connection sets between carrier and toilet fixture. Warranty One-year warranty against manufacturers’ defect. Mounting Accessories Description Frame to wall anchoring for 5.125”-7.875” (13-20 cm) thick unfinished pre-wall Model No. 111.815.00.1 Frame to wall anchoring for 5.125”-7.
PAGE 2
Optional Parts for Geberit Duofix Carrier 111.335.00.5 Waste Fittings Description HDPE straight connector with socket for Ø3.50” (Ø90 mm) push fit piping and Ø3.50” (Ø90 mm) outlet x 12” (31 cm) long HDPE connector with offset for LH horizontal drain connections (as viewed from sitting position), 1 x 90° bend with socket for Ø3.50” (Ø90 mm) push fit piping, with 45º offset and Ø3.50” (Ø90 mm) outlet for 5.5” (13.