111.018.00.1

GEBERIT INSTALLATION SYSTEM
For 1.6/0.8 GPF (6/3 LPF) and 1.28/0.8 GPF (4.8/3 LPF) Wall-Hung Toilets, Pre-Wall Installations
PRODUCT SPECIFICATIONS
In-Wall Duox carrier system and
concealed tank with actuator ush panel or
pneumatic push button for washdown wall-
hung toilets. System shall t within
minimum 5” (140 mm) framing wall or
plumbing chase, with wood construction or
steel framing members placed 19” (500
mm) apart. Framing members should be
capable of supporting a 880 pound (400
kg) load without damage to the wall. Water
supply shall have ow diameter no smaller
than 1/2” (13 mm) copper tube, and a
minimum ow pressure of 2 PSI (0.01 MPa).
The toilet bowl shall be a third party listed,
2-hole wall-hung 1.6 GPF (6 LPF) or
1.28 GPF (4.8 LPF) single-ush, 1.6/0.8 GPF
(6/3 LPF) or 1.28/0.8 GPF (4.8/3 LPF) dual-
ush. The carrier frame shall be adjustable
for bowl rim heights from 15” to 19” (381 to
483 mm). Actuator ush panels shall be
diecast zinc, molded plastic, glass or
fabricated stainless steel and plated to
preserve material integrity. All components
shall be compliant with applicable codes
and product standards.
FEATURES
• Water consumption – Dual-ush system,
1.6/0.8 GPF (6/3 LPF) or 1.28/0.8 GPF
(4.8/3 LPF)
• Anti-siphon ll valve
• Impact resistant high density
polyethylene (HDPE) tank, insulated to
prevent condensation
• 16-gauge, powder-coated, structural-
steel tubing rated to 880 lbs. (400 kg)
without damage to nished wall or carrier
unit
• Bowl rim height adjustments from
15” to 19” (381 to 483 mm)
• 32¼” (820 mm) frame height
• For nished walls up to 3” (9 cm) thick
• Small inspection opening for Omega ush
actuator plates
• Includes installation and rough-in
materials
Complies with the latest editions of:
• ASME: A112.6.2, A112.19.5, A112.19.14
• ANSI Z124.4
• CSA B125.3
• ANSI/ASSE 1002
• IAPMO PS-50
• UNAR / UNAR-HET
• ASME A112.19.2
• This concealed tank is WaterSense®
listed or compliant when used in
combination with the toilet bowl models
listed on page 3 of this sheet
• State of Massachusetts listed
WARRANTY
• Limited lifetime warranty on tank and
carrier, 10-year warranty on ll valve and
ush valve. One-year warranty on
actuator ush plates
ARCHITECT/ENGINEER APPROVAL
Job Name:
Date: Quantity:
Model Specied:
Variations Specied:
Customer/Wholesaler:
Contractor:
Architect:
© 2019 Geberit. Product specications subject to change without notice.
Where water closet grab bars are required
and corresponding reinforcement provided as
outlined in the latest NYC Building Code and
Federal FHA Guidelines, the installed product
complies both for grab bars installed at the time
of initial construction as well as for grab bars
planned for future installation.
Products marked with
comply with the
American Disabilities Act (ADA) when installed per
the requirements of the latest ADA Accessibility
Guidelines (ADAAG) and/or ICC/ANSI A117.1.
1
FF
19
3
/4" (500 mm)
15" - 19”
(381–483 mm)
2
3
/4"
(70 mm)
17"
(430 mm)
2
11
/16"
(70 mm)
5
9
/16" (140 mm)
32
1
/4"-40"
(820-1020 mm)
By bowl
manufacturer
FRH
3
1
/2" to 5
3
/16"
3
1
/2" to 4
3
/4" for 5
1
/2" wall
up to 5
3
/
16
" for deeper walls
3" pipe
(90 mm)
typical
GNA7194 11/19
Model No. Description
111.012.00.1 Carrier frame with 1.60/0.8 GPF Omega Concealed Tank
111.018.00.1 Carrier frame with 1.28/0.8 GPF Omega Concealed Tank