D42521-002 © 04-2010 Carrier Frame for Wall-hung Urinal Geberit Model No.: 111.625.00.1 965.330.00.
Product Data 3" 193/4" 43/4-121/2" NPT min. 31/2" 393/8-461/2" NPT 1/2" 55/8141/2" 1/2" NPT 1/2" 3-13" 31/2" FRH max. 255/8" 44-51" 2" (50) FF 17/8" 27/8" 3/8-31/2" Product Specifications - For installing 2-hole stud mounted urinals with rear water inlet. NOTE: Not for hanger mounted urinals or spud mounted flushometer valves - For HyTouch urinal controls with plate size 5.1 x 5.
Installation Installation Requirements To install carrier, a minimum 3" (75) wall is required. A 2 x 6" wood frame or metal frame construction is recommended. Studs must be placed 19 3/4" apart (clearance) where carrier will be positioned inside the wall.
Carrier Installation A 1 A H B B 2 B 13 H FV UT FRH D42521-002 © 04-2010 FF 4
3 A 6 1 A A A 13 A 2 3 3" 2" 7 A A 4 H B B B 13 5 A 8 D42521-002 © 04-2010 A A 2 1 3/8" 5
9 FV 10 W 12" RC 12" R D 0 (FF) 0 - 7.85" 1 10 min 2 A D42521-002 © 04-2010 .
2 B 3 - 13" 2 1 1 1 3 2 3 1 2 D42521-002 © 04-2010 4 1 2 7
1 Water supply connection NPT 1/2" 2 3 ASSE 1001 listed Atmospheric Vacuum Breaker (included) Watts 288/89A or Chicago Faucets 892-CP NPT1/2" 6" min. distance between highest point of fixture OR as required by local code NPT1/2" NPT 1/2" NPT1/2" Contact Geberit 2100 Clearwater Drive, Des Plaines, IL 60018-5999 www.geberit.