Read Me Before Usage! Manual of 1303
Table of Contents Chapter 1 Content Description —1 Section 1 On-Lap Monitor and Accessories —1 Section 2 Notices of On-Lap Monitor —3 Section 3 Safety Precautions —4 Section 4 Safety Instructions —4 Section 5 Product Maintenance —4 Section 6 LCD Pixel Statement —4 Section 7 Disposal of Electronic Equipment —5 Chapter 2 Installation Instructions —5 Section 1 Cover Stand and VESA 100 Kit Assembly —5 Section 2 Connect the Video Cable and USB Touch and Power Cable —7 Chapter 3 Power On and
目 ２． １． ． ． .
1 Chapter 1 Content Description Section 1 On-Lap Monitor and Accessories 1. Parts Description Fig.: On-Lap 1303 Front & Back Fig.: 1303 buttons and LED light Description Fig.
2 Fig.: On-Lap 1303I Input & Output ports Fig.
3 2. Package & Accessories Accessories USB-A to micro-USB power and touch signal cable (1.2m) HDMI-A to Micro-HDMI Video Cable (1.2m) 1303I 1303H 1303A Yes(2 pcs) Yes(1 pcs) Yes (1 pcs) Yes Yes Yes On-Lap proprietary mini-Displayport cable Optional Optional Optional On-Lap proprietary VGA cable (1.2m) Optional Optional Optional Adapter(5V,Max.2A) 1 pcs Yes Yes No Cover1 pcs Yes Yes Yes Yes Yes Yes Manual 1 pcs HDMI-A to micro-HDMI Video Cable (2.
4 5. 6. 7. Please do not use sharp objects o touch the screen. Gently use the finger to touch or swipe on the screen. While touching the screen, please keep finger clean and dry. Do not press the screen forcefully. Notice for Monitor Clean Disconnect power input before cleaning. Please use soft cloth to clean touch screen monitor. If something is hard to wipe off, please wet the cloth and wipe again. Please do not use chlorine, alcohol, ammonia, detergent or other corroding solvents.
5 Section 7 Disposal of Electronic Equipment The electronic equipment and batteries should not be disposed of with household waste but should be left at an appropriate collection point for recycling. Chapter 2 Installation Instructions Section 1 Cover Stand and VESA 100 Kit Assembly 1 Install Cover Stand 1-1 Take Monitor out: Hold both sides of the cover’s rim by thumbs and then push the monitor from back by the fingers.
6 2 VESA 100 Kit Installation (Optional) First Screw the VESA100 Kit in VESA100 arm or camera cradle head/ tripod. Place the Monitor into VESA 100 Kit, as shown in Fig, and secure the Monitor by screwing in. Fig ： Screw the VESA100 kit in VESA arm. Put the Monitor in and secure it by screws. Fig ： Screw the VESA100 kit in camera cradle head. Put the Monitor in and secure it by screws. 3 Install Stand 4 (optional) Step 1 Assemble Stand 4 Select the desired angle placement to assemble Stand 4.
7 Section 2 Connect the Video Cable and USB Touch Power Cable 1. Connection method for On-Lap 1303H & 1303A Connect USB Power cable first and then connect Video cable. USB power Cable can be connected to USB port of laptop or 5V 2A USB charger. Voice is transmitted by microHDMI or DisplayPort ports. VGA does not support voice transmission. PS: if one USB port of laptop does not supply enough power. Please insert another USB plug to laptop, which supply double power. 2.
8 Chapter 3 Power On and Off the On-Lap Monitor Section 1 Power On and Off the On-Lap 1. 2. From Off state to On state: Press Power Button to activate On/Off. First time use: When Micro USB to USB touch signal and power connect to USB port on computer or 5V DC Charger, On-Lap will automatically start and detect video signal to automatically display video. (Connection method shall refer to Chapter 2 Section 2) Section 2 Monitor Display Setting 1.
9 3. Set Extended Display Mode-Windows 7 System ● Click on icon ● Click on Control Panel > Appearance and Personalization ● Click on Display > Connect to an external display. Normally Display ① is the laptop’s monitor, Display ② is the external monitor. Click on Detect if you are unsure. ● At Display, select “2.HDMI” (digital video) or “2. display device: VGA” (analog video) for Display ● Select Resoluton“1920x1080” for 1303H& 1303I. Select Resolution “1366x768” for 1303A.
10 Notice of operation system compliance On-Lap 1303I supports Windows10/8.1/7 . You can plug & touch on Windows 10/8.1/7 without any driver installation For Windows 8/8.1 before 2015/10/15, which contains different touch oder, may not recognize 1303I. Please upgrade your Windows, or email Gechic for 1303I firmware change. For Linux and Android developer, please active”HID multitouch panels” while establishing kernel, and the external touch monitor can be supported.
11 Hot Keys Description Power: Press the Power Button can power on/off the Monitor. Exit/Auto Adjustment: In the OSD panel, press the Exit Button to exit and back to the previous page. When there is no OSD menu, press this Button will activate automatic adjustment function (only pertains to analog VGA signal) Menu/Select: Press the Menu Button to launch OSD panel. Increase Volume/UP: Press this Button to increase the volume of speakers.
12 3. Color Setting As show in Fig., after Color Settings is launched, can adjust Color Temp and Color Effect to adjust screen color setting. Hue setting can make the image color lean toward green or purple Saturation setting can make saturation more vivid or more black and white. At Color Temperature, select “User”, can adjust RGB color setting, please refer to Fig. Select “Cool” can increase the blue saturation of the image. Select “Warm”can increase the red saturation of the image.
13 6. 7. 8. 9. Audio: Adjust volume or select mute OSD Menu OSD Timer: Adjust OSD Time OSD H. POS: Moves OSD left and right OSD V.
14 Pin 1 Name TMDS Data2+ Pin 11 Name TMDS Clock Shield 2 TMDS Data2 Shield 12 TMDS Clock – 3 TMDS Data2 – 13 CEC 4 TMDS Data1+ 14 Reserved 5 TMDS Data1 Shield 15 SCL (I²C Serial Clock for DDC) 6 TMDS Data1 – 16 SDA (I²C Serial Data Line for DDC) 7 TMDS Data0+ 17 DDC/CEC Ground 8 TMDS Data0 Shield 18 +5 V Power 9 TMDS Data0 – 19 Hot Plug Detect 10 TMDS Clock+ 2.
15 Section 3 Specification Model Panel Resolution/ Color depth Viewing Angle (Typical) Contrast Ratio (Typical) Response Time (Typical) Touch Technology Screen coating Resolution Specification HDMI Video Display Capabilities Speakers Rating Voltage/ Current Dimension (Typical) Weight(Typical) On-Lap1303I On-Lap1303H 13.3" TFT IPS(16:9 Wide) LED Backlight 1920x1080/ 16.7M colors 13.3" TFT IPS(16:9 Wide)LED Backlight 1920x1080/ 16.7M colors 13.
16 Section 4 Trouble Shooting 1. Image or Audio output troubles Problem No response when finger touches on the monitor Solution 1.Check if USB Touch Power Cable plug is connected to computer’s USB port. The USB plug of USB Touch Power Cable cannot transmit touch signal. (Refer to Chapter 2> Section 2) 2. Check if the computer installs Window 10 or Windows 7. While touching On-Lap 1303I, the cursor works on the main display, not 1303I.
