User Manual

11
simultaneously.
3) Choose the button to get to the [Move] interface.
4.2.2 Move
1) When the printer is running with a TF card or connected with a computer, clicking
on the [Move] menu is disabled. This situation also applies to the [Disable] status of the
stepper motors.
2) When the printer is idle,
X-: X axis moves away from the end stop;
X+: X axis moves towards the end stop;
Y-: Y axis moves away from the end stop;
Y+: Y axis moves towards the end stop.
: The motor of Z axis moves upward;
: The motor of Z axis moves downward;
: Click to return to the [home] interface.
Moving distance: Choose one of the values to adjust the moving distance of motors,
before you move each axis. If you fail to choose the corresponding moving distance, the
motor will move according to the current one by default.