User Manual

12
There are five values available. It is convenient to switch the five moving distances by
each click.
Choose 0.05mm and click the moving button, and the motor will move 0.05mm per time.
It is the same with the 0.1mm, 1mm, 10mm and 50mm moving distance.
button to disable/ enable the stepper motors.
Click this button to switch the [Disable] and [Enable] status of the stepper motors. When
you start the printer, the default status is [Enable]. The motors will autonomously turn into
the [Enable] status with the following three operations: 1) start to print; 2) leveling; 3)
loading filament.
1) When the printer is running with a TF card or connected with a computer, the status
of the motors is not switchable.
2) When the printer does not print or stops temporarily,
a. Switch the button to [Enable] to disable the motors. Under this condition, you
can’t manually adjust the position of X/Y/Z axis.
b. Switch the button to [Disable] to enable the motors. Under this condition, you
can manually adjust the position of X/Y/Z axis and home the printer.
The display of the coordinates of the X/Y/Z axis
1） When the motors are disabled, the 888.8 icon indicates that the coordinates are
unknown.
2） When the motors are enabled, the real-time coordinates of the X/Y/Z axis will
appear.
4.2.3 Fan