User Manual

13
On this interface you can observe and modify the status of the fans for the extruder and
the control board.
1) The two fan switches are closed by default, when you start the printer. It will
autonomously open upon printing. During the printing process, it is convenient to
switch on or off the fans by clicking the buttons.
When the switches are on, you can adjust the speed of the fans;
When the switches are off, the speed of the fans can’t be modified.
2) shows the real-time speed of the fans.
3) for adjusting the fan speed: the speed increases/ reduces by
5 at every click.
4.2.4 Leveling