User Manual

14
1) When the printer is running with a TF card or connected with a computer, the
leveling function is unavailable. This situation also applies to the [Disable] status of the
stepper motors.
2) When the printer is idle, please enter the leveling interface. Meanwhile, home the
printer and click the Leveling button on the panel to prepare for the leveling.
Click the 1, 2, 3, 4, 5 randomly to move the extruder to the corresponding point. Use a
piece of A4 paper to complete the auxiliary leveling process.
a. Choose 1: Z axis rises to Z=10mm and the extruder moves to point 1. And then
the printing head moves to Z=0mm. Use a piece of A4 paper to check the
distance between the printing head and the build platform.
b. Choose 2: Z axis rises to Z=10mm and the extruder moves to point 2. And then
the printing head moves to Z=0mm. Use a piece of A4 paper to check the
distance between the printing head and the build platform.
c. Choose 3: Z axis rises to Z=10mm and the extruder moves to point 3. And then
the printing head moves to Z=0mm. Use a piece of A4 paper to check the
distance between the printing head and the build platform.
d. Choose 4: Z axis rises to Z=10mm and the extruder moves to point 4. And then
the printing head moves to Z=0mm. Use a piece of A4 paper to check the
distance between the printing head and the build platform.
e. Choose 5: Z axis rises to Z=10mm and the extruder moves to point 5. And then
the printing head moves to Z=0mm. Use a piece of A4 paper to check the