User Manual

20
Step 2. Coarse leveling. Click the leveling point 5, the extruder will move to the fifth
point. Put a piece of A4 paper between the nozzle and build platform. Slide the paper back
and forth. Stop when you feel the nozzle just start to grab a little bit.
If you cannot feel a little bit friction at all, it means the distance between the nozzle and
build platform is too far and the adhesion of filament to the platform will be not guaranteed.
You need to click the downward icon to move the Z axis down in order to reduce the
distance between the nozzle and the build platform.