User Manual
Table Of Contents
22
Notes:
i. When you finish leveling job, we recommend you test the build platform again
to ensure the satisfying leveling.
ii. When the printer is violently shaken during shipping and moving, the height of
the build platform may be affected. You need readjust the leveling.
iii. When there is the wrapping, curling or after you dismount the extruder, please
readjust the leveling.
After restoring factory settings, we suggest you check the height of the nozzle and
platform.
6. Start to Print
E180 could be used under three conditions: printing with EasyPrint 3D, stand-alone
printing with a TF card and printing via Wi-Fi connectivity.
6.1 Printing with EasyPrint 3D
6.1.1 Connect E180
Connect E180 with your computer with a USB cable. Turn on the power switch.