Use and Care Manual

3
Indication
Function
ON/OFF button:
Press the button once, the fan will start at 2 speeds (LOW). The power and speed
indicator light will be on. Press again to turn the fan off.
SPEED knob:
Adjust fan speed:
Turn the knob clockwise to increase the speed, Maximum speed is 4 (HIGH).
Turn the knob anticlockwise to decrease the speed, Minimum speed is 1 (SOFT).
The digital LED screen will display speed setting.
TIMER button:
When the fan is in use, you can set the time to
power off the appliance. You can set the
timer off function between 1 and
6 hours by 1 hour increment.
The digital LED screen will display the set timer.
Up / Down OSC button
To activate the Oscillation feature, press the button once.
Press it again to cancel.
Right / Left OSC button
To activate the Oscillation feature, press the button once.
Press it again to cancel.
BREEZE button: to select NORMAL, NATURAL or SLEEP breeze.
NATURAL: the fan operates according to computerized intervals of changing
speeds to simulate natural breeze
SLEEP: the fan operates according to computerized intervals of changing speeds to
generate breeze good for sleeping.
SMART MODE (temperature sensor)
In this mode, the fan will sense room temperature and change speeds automatically
according to room temperature change as follow:
Below 77℉: the fan will operate in 1 Speed (SOFT).
77℉- 82℉: the fan will operate in 2 Speeds (LOW).
84℉- 93℉: the fan will operate in 3 Speeds (MEDIUM).
Above 93℉: the fan will operate in 4 Speeds (HIGH).
Press the button again to cancel this mode.
Note: The current timer, speed and temperature will be shown alternately on the display if they are set.