Installation Guide

6
 After you have connected the appliance to the mains supply the backlight will turn on. It will turn
of
f after 5s without any operation and the hood will enter stand-by mode.
TOUCH CONTROLS
 P
ress one of the speed butt
ons
to turn the appliance on.
 P
ress the button
for low speed. Push the button again and the motor will stop.
 P
ress the butt
on
for medium speed. Push the button again and the motor will stop.
 P
ress the butt
on
for high speed. Push the button again and the motor will stop.
 P
ress the butt
on
and the lights will come on. Push the button again and lights will turn
off.
 W
hile the range hood is in use, if you press the timer butt
on
once, the range hood will run
for 5 minutes and then enter stand-by mode.
LED LIGHTS
A
lways switch off the electricity supply before carrying out any operations on the appliance.
To change the light:
Open the filter and find the spring of the light, push the spring and the light will be slip out. Change
the light as with same kind of 4 Volt, 2.5 Watt LED light.
Caution:
Light may be hot, please rotate when the light is cool.