User Guide
Table Of Contents
- User Manual
- History:
- For Use With
- Operating System
- X930 HiFi DAC HAT
- Intelligent and safe power management
- On-board buttons to switch the Bluetooth or Raspbe
- Supports safe reboot, safe shutdown and full power
- Most efficient way to avoid OS image corruptions &
- On-board LEDs show the status of power on, reboot
- Please refer to the user manual for Script for pow
- Interface Schematic
- X930 V1.3 Packing List
- About Power
- Hardware
- Software
- FAQ
https://geekworm.com Support: support@geekworm.com
- 3 -
GPIO used for power management: IO5, IO12, IO13
Analog audio output level: 2V RMS
Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
PCB size 65 x 56mm
Intelligent and safe power management
On-board buttons to switch the Bluetooth or Raspberry Pi on /off
Supports safe reboot, safe shutdown and full poweroff from software
Most efficient way to avoid OS image corruptions & other issues that can damage your Pi!
On-board LEDs show the status of power on, reboot and shutdown
Please refer to the user manual for Script for power management (Volumio)