Operation Manual

9
Setting Up
For portable child monitoring by parent,
remove the battery cover found on the rear
of the unit, insert 3 alkaline batteries (AAA
size, 1.5V type, these are supplied) into
the battery compartment. Check the
battery polarity diagrams in the battery
compartment when inserting the batteries.
Replace the battery cover – it will snap
back into place.
Slide the Power On/Off switch to On to
activate.
Note :
When the LED indicator flashes red, it is
time to replace the batteries.
Alternatively, you can use a mains adaptor
(not supplied). Simply plug the adaptor into
the socket on the left side of the unit and
INSTALLATION