Operation Manual

ManualsBrandsGeemarc ManualsTelephonesAmpliDECT 280

Way 2: Using the base unit

In the active mode (all lights on) press the or

key to play Announce1/2, then press and hold

the key to restore it to the default one, you

will hear a confirm tone. The default Announce1 or

Announce2 will be played back after that.

Restore Announce1/Announce2

Way 1: Using the menu

1. Press the TAM soft key in Standby mode.

2. Press the Select soft key to choose Announce.

3. Press Select soft key to choose Announce1 or

press the Down key to choose Announce2,

then press the Select key to confirm.

4. Press the key repeatedly to choose

Default, press the Select key to confirm.

5. The LCD will show Confirm ?. Press the Select

key to restore the default Announce1

/Announce2 or press the Back key to cancel.

Way 1: Using the menu

1. Press the TAM soft key in Standby mode.

2. Press the Select soft key to choose Announce.

3. Press Select soft key to choose Announce1 or

press the Down key to choose Announce2,

then press the Select key to confirm.

4. Press the Select soft key to choose Playback.

5. The current Announce1/2 will be played. During

the process you can use the Back soft key to

stop and exit.

Way 2: Using the base unit

In the active mode (all lights on) press the or

key on the base unit to playback the current

Announce1/Announce2. Use the key to end the

playing at any time.

aaa

48

13

The supplied handset carrying clip allows you to

conveniently carry the handset with you. It clips

easily to your belt, waist band, or shirt pocket.

If you want to remove the carrying clip:

Insert a screw driver along the edge of one of

its arms and release the clip. Then lift it off.

Using Handset Carrying Clip

Play Announce1/Announce2

You can play the current Announce1/2.

Using Headset (optional)

The headset jack is located in the left side of the

handset and is 2.5mm standard plug. Simply plug

the headset into this jack and the headset will be

activated.

Note:

When the headset is plugged into the headset jack

the microphone on the handset will be deactivated.

Earphone

Microphone

Clip

Headset Jack