Operation Manual

80
If the base is found and the handset is successfully
registered, you will be prompted to enter the PIN code
(the default is 0000).
If the PIN code is accepted, the registration tone will
sound and the base assigns a number to the handset. If
the PIN code entered is invalid, a warning tone will sound,
and the handset will return to the
previous registration state.
Select a Base
Your handset can be used with up to 4 bases. See Select Base
in Handset Settings.
Note: In order to use the handset with more than one base unit,
the handset must be registered with each base (see Register a
New Handset section).
Release a Handset
A registered handset can be removed from a base if necessary.
See Terminate Handset in Base Settings.
Internal Calls
When using several handsets registered to the same base unit,
you can make internal calls and transfer external calls between
handsets.
Make an Internal Call
HANDSET: Press
BASE: Press
Enter the handset number you wish to page (0-5 will
appear on the handset). 0 is the base telephone. (1-5)
will appear on the base telephone)
ADDITIONAL HANDSETS & BASES