Operation Manual

19
Delete Incoming Messages
If you want to delete a single incoming message press C while the
message is playing.
To erase all messages after playback, press and hold C until a beep is
heard.
Please note that new messages cannot be deleted until they have been
played.
Call Screening
Incoming messages can be heard through the Speakerphone as they are
received. If there is no sound adjust the volume using the control on the
right hand side of the telephone.
If you want to speak to the caller, lift the handset. If the recording does not
stop automatically, press on the answering machine, or press * (for 2
seconds) on the telephone.
Operating the Answering Machine Remotely
This answering machine can be accessed remotely using the keys of an
ordinary tone dialing telephone. Call the answering machine (using your
telephone number) and enter the remote code while the outgoing
message is playing. Once the code is accepted, several remote control
commands are available.
Remote Code
A confidential three digit code is required to activate/deactivate the
answering machine or listen to your messages from a remote external
telephone. The remote code is printed on the base of the machine.
ANSWERING MACHINE