e GB CAUTION:THIS TELEPHONE PRODUCT IS SPECIFICALLY DESIGNED FOR PEOPLE WITH HEARING DIFFICULTIES AND IS PROVIDED WITH A HANDSET EARPIECE VOLUME CONTROL FOR INDIVIDUAL REQUIREMENTS. DUE CARE MUST BE TAKEN BY ALL USERS THAT THE HANDSET EARPIECE VOLUME CONTROL IS SET TO THE LOWEST LEVEL ACCEPTABLE BY EACH RESPECTIVE USER. CARE SHOULD THEREFORE BE EXERCISED TO ENSURE THAT ANY NEW USERS ARE FAMILIAR WITH THIS REQUIREMENT. ATTENTION: CE TELEPHONE PEUT ETRE DESTINE AUX PERSONNES AYANT DES PROBLEMES D’AUDITION.
INDEX DESCRIPTION - General description - LCD screen - Screen display 5 7 8 INSTALLATION - Connecting - Wall mounting 9 11 SETTINGS - Ringer settings - Alarm and ringer settings - Dialling mode (P/T) - New call indicator & Hotel message switch - Choose the date / hour format - Date and hour settings - Set the language - Screen contrast adjustment - Auto-on hook - DIM:X---->x - Time break recall setting ”R” function 12 13 13 14 14 16 16 17 18 19 20 USING THE PHONE - Answer a call - Make a call - Use th
INDEX - Last number redial - Recall one of the last 30 number dialled - Delete one of the last 30 numbers dialled - Mute button - R, * and # keys - Store a telephone number in memory - Dialling stored numbers - Use the headset (option) - Use the neckloop (option) - Use the shaker (option) 24 25 25 26 26 27 28 29 29 30 SENDING LEVEL SETTINGS 31 RECEIVING TONE AND VOLUME SETTINGS 32 PHONE BOOK - Create an entry - Create an entry from the incoming call list - Delete a phone book entry - Modify a phone bo
INDEX - Delete all records from the CID list - Call waiting - Message waiting 43 43 46 GUARANTEE 47 For product support and help visit our website at www.geemarc.
DESCRIPTION 1- GENERAL DESCRIPTION Priority memory P1 Priority memory P2 Tone reception adjustment Priority memory P3 Key to activate tone and volume adjustment function Volume reception adjustment Direct memory Memory storing key Hands free dialling and amplifier.
DESCRIPTION Additional amplifier button Clip to return for wall mount Speaker Handset cord Speaker volume adjustment Tone and volume adjustment automatically activated each time you hang-up the phone Sc re en Ringer/shaker /strobe select mode Ringer level adjustment 6 tilt Sending volume adjustment
DESCRIPTION 2 - LCD SCREEN Screen example (On hook position) Power network icon Minutes Hours Day Month Cancel key Up/down keys Validation key - OK key is used to confirm action or a choice on the screen. keys are used to scroll through the menu. - In general, the C key is used to cancel an action/ entry, it can also be used to confirm a choice (for example to cancel a stored number).
DESCRIPTION 3 - SCREEN DISPLAY Your CL400 has a screen with different icons which help you to use the telephone. The telephone is supplied by battery + battery indicator The telephone is supplied by adaptor Memory storing is required. Screen contrast level. “Mute” is activated. Speaker is activated. Precede the CID call record number. N To show new records.
INSTALLATION 1 - CONNECTING Shaker socket* Only Geemarc reference Neckloop socket* Only Geemarc reference Tone&volume ON/OFFswitch Adaptor socket** Headset socket* Only Geemarc reference Only Geemarc reference Line cord socket* (*) Classified TNV-3 according to EN60950 standard. (**) Classified “hazardous voltage” according to EN60950 standard. Important: Only Shaker, Neckloop, Headset and Adaptor with Geemarc reference can be connected to the sockets. - Connect the handset.
INSTALLATION - Connect the adaptator plug to the adaptor socket located on the back of the telephone then connect it to the wall socket (**). Please choose an adaptor wall socket near your line plug to enable you to unplug the adaptor quickly in case of a problem. Note: The adaptor is required for the telephone to work correctly. Batteries are necessary in case of network power failure to save stored number in memory and are required for phone book use.
INSTALLATION 2 - WALL MOUNTING To wall-mount your telephone,slide out the clip, turn around and slide back into the wall mounting position.This will ensure that the handset stays firmly in position. Make 2 holes in the wall 80mm apart (use the wall mount template), insert the wall plugs and the wall mounting screws.
SETTINGS 1 - RINGER SETTINGS A switch located on right side allows the ringer to be switched HI,LOW,OFF: : Off : Low : Hi Your phone comes with the ringer switched to «High». If you don’t like the ringer melody,you can choose a new one by changing the settings between four settings as follow: In on hook position, key. - Press the - Use the or keys to select «SET PHONE». - Press the OK key to confirm. - Select «SET RING» - Press the OK key to confirm. - Select the ring you would like.
SETTINGS 2 - ALARM AND RINGER SETTINGS A 3 position switch located on the right side of the phone allows the settings below: - : Ringer and strobe flash are activated. : Ringer and shaker are activated. : Ringer, shaker and strobe flash are activated. 3 - DIALLING MODE (T/P) The Tone/Pulse switch is factory pre-set to Tone position (T). In the UK, all telephone exchanges now use Tone dialling.If your phone does not dial out, it is probably being used from an older private switch- board (PBX).
SETTINGS 4 - NEW CALL INDICATOR & HOTEL MESSAGE WAITING SWITCH Hotel message waiting is used with the new services provided on hotel network. The New call indicator is used to indicate a new incoming call. A switch located on the base of your phone allows to set ON/OFF the hotel message waiting or new call light functions. When the switch is set to ON, new call light will flashes when a new call is received.
SETTINGS - Press the OK key to confirm. - Select «DATE FORMAT». - Press the OK key to confirm. - Select «DAY-MONTH» or «MONTH-DAY». - Press the OK key to confirm. - Press the C key twice to exit. Hour format You can choose between two formats: 12 hours or 24 hours. In on hook position, - Press the key. Use the or keys to select «SET PHONE». - Press the OK key to confirm. - Select «HOUR FORMAT». - Press the OK key to confirm. - Select «12 HOUR» or «24 HOUR». - Press the OK key to confirm.
SETTINGS 6 - DATE AND HOUR SETTING In on hook position, - Press the key. - Use the or keys to select «SET TIME». - Press the OK key to confirm. or keys to select the desired - Use the digit. - Press the OK key to confirm and pass to the next digit. You will set the time like this: HOURS - MINUTES - MONTH - DAY - Press the C key to exit. Note: When you receive your first call, all these parameters will be set autoumatically if you have the CID feature.
SETTINGS To change the language, follow the settings as below: In on hook position, - Press the key. or keys to select «SET PHONE». - Use the - Press the OK key to confirm. - Select «SET LANGUAGE». - Press the OK key to confirm. - Select «FRENCH» (for example). - Press the OK key to confirm. - Press the C key twice to exit. 8 - SCREEN CONTRAST ADJUSTMENT Your screen has a backlight which automatically switches off after 15 seconds of inactivity.
SETTINGS - Press the OK key to confirm. - Select «LCD CONTRAST». - Press the OK key to confirm. - Use the or keys to adjust the contrast level. - Press the C or the OK keys to exit. 9 - AUTO- ON HOOK This function cancels the line after 8 seconds if the line is busy. In on hook position, key. - Press the - Use the or keys to select «SET PHONE». - Press the OK key to confirm. - Use the or keys to select «AUTO ON HOOK». - Press the OK key to confirm.
SETTINGS 10 - DIM:X---->x If the auto-screen sizing is activated, the screen can display up to 18 digits of the number you dial, otherwise only 8 digits will be displayed on the screen. In on hook position, - Press the key. - Use the or keys to select «SET PHONE». - Press the OK key to confirm. - Use the or keys to select «DIM:X---->x». - Press the OK key to confirm. or keys to select «ON» or « - Use the OFF» to activate or deactivate the function. - Press the OK key to confirm.
SETTINGS 11 - TIME BREAK RECALL SETTING “R” FUNCTION Your phone works with a time break recall for United Kingdom (R=100ms). If you wish to change this value, follow instructions below: In on hook position, - Press the key. - Use the or keys to select «SET PHONE». - Press the OK key to confirm. or keys to select «SET FLASH». - Use the - Press the OK key to confirm. - Select a new setting, 300 or 600ms and press OK to confirm. - Press the C key twice to exit.
USING THE PHONE Your CL400 allows you to speak hands free, surrounding people can also hear the conversation. 1 - ANSWER A CALL During an incoming call, your phone will ring and then the Number or/and the Name of the caller is displayed on the screen, if you have subscribed to the CID service. 1st solution : - Lift the handset and speak. - On completion of the call, carefully replace the handset in the cradle to release the line.
USING THE PHONE 2 - MAKE A CALL 1st solution - Lift the handset. - Await the dial tone and dial required number( the number is displayed on the screen). - On completion of the call,carefully replace the handset in the cradle to clear the line. 2nd solution (Pre-dialling) - Dial the required number in the on hook position. The C key allows you to come back to delete a wrong digit when dialling the number. - Lift the handset, the number will be automatically dialled .
USING THE PHONE wrong digit when dialling the number. - Press the key, the number will be automatically dialled. - When the person answers you, simply speak into the microphone located on the base. You can adjust the speaker level with the slide button located on the left side of your telephone. - On completion of the call, simply press the key to clear the line. Notes:To deactivate the «hands free» function during a call, lift the handset. light off. The symbol appears.
USING THE PHONE 3 - USE THE AMPLIFIER During a call, if you wish to use the amplifier function with the speaker phone: - Press the key. - Adjust the sound level with the VOLUME slide button located on the left side of your telephone. During a call, if you wish to use the «hands free» function: - Press and hold the key and replace the handset on the cradle at the same time. - Then release the key. - Hands free function is activated.
USING THE PHONE 5 - RECALL ONE OF THE LAST 30 NUMBERS DIALLED You can call back the last 30 numbers dialled. To call back one of them, follow instructions below: In on hook position, - Press the OK key. Screen will display “DIALLED”,the last number dialled, the total of numbers, the date and the hour of records. - Use the or keys to move into the record menu and select the number you wish to dial. - Lift the handset or press the , the number will be automatically dialled.
USING THE PHONE menu and select the number you wish to delete. - Press the C key. The screen will display “DEL ?”. - Press again the C key to confirm . - Press the OK key to exit. 7 - MUTE FUNCTION If you wish, you can speak privately to someone else in the room without your caller overhearing. You will still be able to hear the caller but they cannot hear you during the mute operation. - During a call press the key. X. The screeen will display Your caller cannot hear you anymore.
USING THE PHONE 9 - STORE A TELEPHONE NUMBER IN MEMORY Your phone can store 8 direct memories including 3 priorities numbers (30 digits maximum for each memory). For example, the 3 priority P1, P2, P3 memories allow you to store the 3 numbers below: - Local,Police station, - Your doctor - 1471 It is recommended to store these numbers during installation To store a number please follow instructions below: - Lift the handset. - Press button. - Dial the number. - Press M1, M2, ...
USING THE PHONE 10 - DIALLING STORED NUMBERS - Lift the handset or press or and await the dial tone. - Press appropriate button M1, M2, ..., or M8 or one of the 3 priority P1, P2, P3 numbers, the stored number will be dialled automatically.To register your stored phone numbers,use the index card located under the base.Use this table below to prepare the phone book. 1 2 3 4 5 6 7 8 9 Example : Pierre 1 01 64 57 .. ..
USING THE PHONE 11 - USE THE HEADSET WITH MICROPHONE (OPTION) Headset: If you wish to answer or make call by using a Geemarc headset ref: HEADSCL_BLK, connect the headset plug in the headset socket located behind your phone. key to get the dial tone. - Press the - Dial the number. Note: You can adjust the reception volume and tone level with the VOLUME and TONE slide button located on the top of the phone (if function is active) and the sending level with the 3 position switch located on the right side.
USING THE PHONE You have three possibilities to use: 1st solution: Press the to activate the neckloop and headset, speak into the headset microphone. 2 nd solution: Press the to activate the neckloop and the amplifier, speak into the microphone located on the base. 3 rd solution: Lift the handset and speak into the handset microphone. Note: You must connect the adaptor to use the neckloop. You can also adjust the reception level.
SENDING LEVEL shaker plug in the socket located at the back of your phone.When an incoming call is received, the shaker will be activated during ringing. Note: This option must be set in the ALARM AND RINGER OPTIONS item (page 12) to be activated. Important: For your security, only connect the Geemarc SHAKCL_WH model, any other shaker model can damage your telephone.
RECEIVING TONE AND VOLUME 1-VOLUME AND ADJUSTMENT TONE RECEIVING You can increase the volume and adjust the receiving tone according to your own hearing requirements.The button allows extrareceiving and tone functions to be activated during the conversation. When the function is activated, the red light of extra-receiving and tone function located near the button is lit. Use the TONE and VOLUME buttons to adjust the level according to your own hearing requirements.
RECEIVING TONE AND VOLUME TONE Bass +10db max Treble +10db max Normal VOLUME 0dB 15dB OFF 15dB 30dB ON Note: When the tone (treble), earpiece volume and sending levels are set to the maximum, whistling may appear. If whistling occurs the sending level settings should be decreased (sending level switch located on the right side). When the switch located behind the phone is ON, the extra-receiving and tone functions are automatically activated each time you use the phone.
PHONE BOOK 1 - CREATE A PHONE BOOK ENTRY You can store 99 entries into the phone book with the name and phone numbers of your correspondant. In on hook position, - Press the key. keys to select «PHONE BOOK». - Use the or - Press the OK key to confirm. - Select «ADD». - Press the OK key to confirm. - Enter the number (30 digits max per memory). - Use the C key to delete a wrong digit. - When the number is correct, press the OK key to confirm and enter the name corresponding to entered number.
PHONE BOOK Key Characters Key Characters 1 2 3 4 5 1 . ? - " ' < A B C a b c 2 EO D E F de f 3 G H I gh i 4 J K L j k l 5 6 7 8 9 0 M N O mno6 O O P Q R S p q r s7 TU Vt u v 8 U W X Y Z w xyz9 0 + & @/ $ % - To insert a «space», press on the OK key twice. - If the next letter is the same as the previous letter (or located on the same key), press first on the OK key to move and select the desired letter. - Use the C key to delete a wrong letter.
PHONE BOOK 2 - CREATE AN ENTRY FROM THE INCOMING CALL LIST If you have subscribed to a caller idendification service (CID feature), you have the possibility to create an entry from the incoming call list because each call is stored into the phone book as a CID entry. In on hook position, - Incoming calls will be displayed on the screen. - Use the or keys to select the number you wish to store into the phone book. - Press and hold the OK key until the last number digit flashes. - Press the OK key.
PHONE BOOK 3 - DELETE A PHONE BOOK ENTRY In on hook position, - Press the key. - Use the or keys to select «PHONE BOOK» then «REVIEW». or keys to select the number you - Use the wish to delete. - Press the C key, screen display «DEL?» - Press the C key to confirm. - Press the OK key to exit. 4 - MODIFY A PHONE BOOK ENTRY In on hook position, key. - Press the or keys to select «PHONE - Use the BOOK» then «REVIEW». - Press the OK key. or keys to select the number - Use the you wish to modify.
PHONE BOOK - Press the C key to modify the number and insert new number. - Press the OK key. - You can now modify the name. - Press the C key to delete a letter. - For help see the «CREATE A PHONE BOOK ENTRY» p.34 to modify the name. - Press the OK key for 3 seconds to confirm the new entry. - Press the C key to exit. 5 - MAKE A CALL FROM A PHONE BOOK ENTRY In on hook position, - Press the key. or keys to select «PHONE - Use the BOOK» then «REVIEW», then press the OK key.
CID FEATURES Note : You can review the incoming call list during a call by pressing the OK key, then use the & keys to move through the phone book list. 1 - USE THE INCOMING CALL LIST Associated with the CID feature, the call list allows you to store the incoming calls. When the call list memory is full, a new call will take the place of the oldest call. Each call is stored as an entry with the date, the hour and in arrival order.
CID FEATURES If the number is unknown from the telephone center (international incoming call for example), the screen will display OUT OF AREA: 9:52 9-09 3 OUT OF AREA When the same caller calls several times, only the last call will be stored into the incoming call list and the screen will display +. 9:52 9-09 N 2+ 654321654321 HELEN Note : During the entries review, the screen will display N for a new entry which has not been reviewed.
CID FEATURES To review the new calls, use the & keys. When all new calls have been reviewed, the new call 16-6 28 LED will disappear and the screen will come back to idle state after a few seconds.The total number of incoming call entries on the incoming call list will still be displayed on the screen. 16 : 53 12 : 55 18-6 00 When the incoming call list is empty (if records have been deleted for example) the screen will display 00.
CID FEATURES - Lift the handset or press the or the keys. - The number will be dialled automatically. Lift the handset, - Use the or keys to move into the list and select the required number to dial. - Press the OK key. - The number will be dialled automatically. Note : The call back function from incoming call list is not availaible for a number which displays PRIVATE or OUT OF AREA.
CID FEATURES - Press the OK key to exit. 4 - DELETE ALL RECORDS FROM THE CID LIST In on hook position, - Press the or keys. - Press and hold the C key until the screen displays «ALL DEL?». - Press the C key to confirm. 5 - CALL WAITING With this service, you are made aware that a new call is coming through when you are in conversation. You can take this call and switch between callers.To be active, you must have subscribed to this service with your network provider.
CID FEATURES In on hook position, - Press the key. or keys to select «SET PHONE». - Use the - Press the OK key. - Use the or keys to select «CALL WAITING». - Press the OK key. - Use the or keys to select «ON». - Press the OK key and then C twice to exit. Note : When the call waiting function is activated on your telephone and if you wish to deactivate it simply select «OFF» in the menu «CALL WAITING». - When you are in conversation with caller N°1.
CID FEATURES A beep tone will be heard when a second call is incoming. Caller N°2 CID information will be displayed on the screen (Name and Number). 9:52 9-09 1 654321654321 CALLER N°2 For more information about the «CALL WAITING» service contact your network provider. Note : If you don’t answer call N°2, the call will be recorded into the incoming call list. Then you will be able to call them later. For product support and help visit our website at www.geemarc.
CID FEATURES 6 - MESSAGE WAITING This system provides the capability of the caller to leave a message. You will be informed of an incoming call by the incoming call list that you have a message. This call is distinguished from other calls and screen displays «MSG WAITING», the message waiting LED is activated. 9:52 9-09 N 1 3103 MSG WAITING Note : «MSG WAITING» will be displayed to indicate message not read. After review «MSG WAITING» will be automatically removed from the screen.
GUARANTEE GUARANTEE From the moment your Geemarc product is purchased, Geemarc guarantee it for the period of one year. During this time, all repairs or replacements (at our discretion) are free of charge.Should you experience a problem then contact our helpline or visit our website at www.geemarc.com.The guarantee does not cover accidents, negligence or breakages to any parts. The product must not be tampered with or taken apart by anyone who is not an authorised Geemarc representative.