Instructions

13
4.3 Answer a Call
When there is an incoming ring, pick up the corded handset or press SPEAKER to answer the call.
4.4 Volume Boost Function
The Volume Boost function allows you to amplify the handset earpiece volume to compensate for the ear’s
limited sensitivity.
During a call, you can activate the Volume Boost function with the volume of earpiece increased by
several dBs by pressing , “BOOSTER ON” displays on the base screen. To cancel it,
press again.
4.5 End a Call
During a call, put the corded handset on the base station to end the call.
OR
Press SPEAKER if you have a call in speakerphone mode.
4.6 Adjust Earpiece and Speakerphone Volume
There are 6 levels (VOLUME 1 to VOLUME 6) to choose from for each of earpiece and 7 levels for
speakerphone volume of the base.
Using the base: During a call:
Press / to select volume 1-6. The current setting is shown. When you end the call, the settings will
remain at the last selected level.
4.7 Mute a Call
With the call muted, you can talk to someone nearby without letting the caller hear you during a call.
Using the base: During a call:
Press to mute the microphone and “MUTE ON” is displayed on the LCD. Your caller
cannot hear you. Press again to resume the microphone.
4.8 Modify the tonality during a call
Using the base: During a call:
Press M4 TONE to increase the high, low frequencies or come back in normal response.
4.9 Emergency Call without Main Power
The corded base unit can make an emergency call with the corded handset when the mains AC power is
disconnected.
Pick up the corded handset and wait for several seconds to get the dial tone and then enter the phone number
to make a call.
REMARK:
It is not possible to dial numbers from memories when the mains power is off.
When the mains power is off, you can also answer an incoming call with the corded handset.
When the phone rings, pick up the corded handset to talk to the caller.
US
E
YOUR PHONE