Instructions

14
4.10 Redial the Last Number
You can redial up to 10 of the last numbers called on the cordless handset or on the corded telephone
base. If you have stored a name in the phonebook to match with the number, the name will be displayed
instead. The most recently dialed number will be displayed at the top of the redial list.
4.10.1 Redial a Number from the Redial List
1. In idle mode, press to view the redial list.
OR
Press MENU/OK 2 times to access at the redial list
2.
Press / to browse the redial list.
3.
Pick up the corded handset or press SPEAKER to dial to the selected redial number.
NOTE:
If there are no numbers in the redial list, the display will show “EMPTY”.
4.10.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.10.1.
2. Press MENU/OK and / to select ADD TO PB?
3. Press MENU/OK and check the redial number.
4. Press MENU/OK and enter the name.
Press MENU/OK to confirm
4.10.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.10.1.
2. Press MENU/OK and / to select DELETE
3. Press MENU/OK to confirm and CONFIRM? is displayed.
4. Press MENU/OK to reconfirm
4.10.4 Delete the Entire Redial List
1. Follow Steps 1 and 2 in section 4.10.1
2. Press MENU/OK and / to select DELETE ALL?
3. Press MENU/OK to confirm and CONFIRM? Is displayed.
4. Press MENU/OK to reconfirm.
4.11 Find the Handset (if you have added an additional handset)
This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
1. In idle mode, press MENU/OK and / to select PAGE ALL HS.
2. Press MENU/OK to confirm. “PAGING” will flash on the base screen.
All the handsets registered to the base will produce the paging tone, and “PAGING” will
flash on the
screen. You can stop the paging by pressing / / /
CANCEL/MUTE on any handset or
on the base to stop paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call instead of paging.
US
E
YOUR PHONE
US
E
YOUR PHONE