Instructions

4.12 Make an Internal Call (if you have added an additional handset)

This feature allows you to make internal calls, transfer external calls and make conference calls. If the

called base or handset is not answered within 60 seconds, the called base or handset will stop ringing

and the calling one will return to standby mode.

4.12.1 Intercom (if you have added an additional handset)

Using the corded base:

1. In idle mode, press and / to select the handset you want to call.

2. Press MENU/OK to confirm.

The called handset rings. Press on the called handset to establish the

internal call.

NOTE:

If only one cordless handset is registered to the base station, press

will call the cordless handset immediately.

4.12.2 Call All Handsets (if you have added an additional handset)

Using the corded base:

1. In idle mode, press and / to select ALL.

2. Press MENU/OK to confirm.

4.12.3 Transfer an External Call (if you have added an additional handset)

Using the corded base: During an external call:

1. Press MENU/OK and / to select INTERCOM

2. Press MENU/OK and choose the desired handset you want to intercom with, then press MENU/OK.

3. The external call is put on hold automatically and the called handset rings.

Press on the called handset to establish an internal call.

5. Hang up the corded handset on the calling base to end the internal call.

6. The external call is transferred to the called handset.

4.12.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with the corded base and cordless

handset or two cordless handsets. The three parties can share the conversation and no network

subscription is required.

During the external call:

1. Follow Steps 1 to 4 in section 4.12.3.

2. Press and hold on the calling handset to establish the conference call.

NOTE:

Any party (corded base or cordless handset) hangs up during a conference call will leave the other

party still in connection with the external call.

YOUR PHONE