Instructions

27
12.1.4 Set the Key Tone
The key tone is a confirmation beep when you press any key. It is set on by default but can be turned
off, if desired.
1. Press MENU/OK and / to select BS SETTINGS.
2. Press MENU/OK and / to select KEY TONE.
3. Press MENU/OK and / to select ON or OFF.
4. Press MENU/OK to confirm.
12.1.5 Set the Flash Time
The default flash time is best suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU/OK and / to select BS SETTINGS.
2. Press MENU/OK and / to select FLASH TIME.
1. Press MENU/OK and / to select the desired flash time (SHORT=100ms,
3. MEDIUM=300ms, LONG=600ms).
4. Press MENU/OK to confirm.
12.1.6 First ring function
Sometimes, our phone rings one time to inform that we have any voice message on the line. To remove
this ringer, you must activate the function.
1. Press MENU/OK and / to select BS SETTINGS.
2. Press MENU/OK and / to select FIRST RING.
3. Press MENU/OK and / to select ON or OFF.
4. Press MENU/OK to confirm.
12.1.7 Reset Your Base
You can reset all of your base settings to their default settings. After a reset, all your personal base
settings, call list entries, redial list entries and answering messages will be deleted.
1. Press MENU/OK and / to select BS SETTINGS
2. Press MENU/OK and / to select BS DEFAULT.
3. Press MENU/OK and / to select DEFAULT.
4. Press MENU/OK and the display shows “CONFIRM?”.
5. Press MENU/OK to confirm.
PHONE SETTINGS