Telephone User Guide

SETTING UP
1 - CONNECTING TELEPHONE
The plug at the end of the lead should be connected to the
telephone socket.
Voltages present on the telecommunication network are classified
TNV-3 (Telecommunication Network Voltage) according to the EN60950
standard.
2 - RINGER SETTING
A switch located on the right of the base allows to switch
On or Off the ringer.
3 - WALL MOUNTING
To keep your handset in vertical position, slide out, turn
around and slide back in the wall mounting handset clip (which can
be found in the base unit, just below where the ear piece locates),
this ensure that the handset stays firmly in position.
USING THE TELEPHONE:
1 - ANSWERING INCOMING CALLS
When an incoming call is received, the telephone will
ring. To answer the call lift the handset and speak.
2 - MAKING A CALL
Lift the handset, await the dial tone and dial required
number. On completion of the call, carefully replace the handset in
the cradle.
3 - LAST NUMBER REDIAL
Lift the handset, await the dial tone and press the
button. The previously dialled number will be AUTOMATICALLY
RE-DIALLED.
4 - R, * & # BUTTONS:
These are used with the new services provided on digital
exchanges. For details please contact your network operator.
5 - MUTE BUTTON
If you wish to speak privately to someone else in the
room (without your caller overhearing) press and hold the
button. Your caller may still be heard during the MUTE operation. To
resume normal conversation , release the
button.
GB
INSTALLATION
1 - RACCORDEMENTS
Branchez le conjoncteur téléphonique dans la prise téléphonique
murale.
Les tensions présentes sur ce réseau sont classées TRT-3 (Tension de
Réseau de Télécommunication) au sens de la norme EN60950.
2 - SONNERIE
Un commutateur situé à droite de la base permet de désactiver
(Off) ou d’activer (On) la sonnerie.
3 - POSITION MURALE
Pour maintenir votre combiné en position verticale, retirez l’er-
got situé sur la base (en dessous du bouton de raccorché), le tourner et le
réinsérer.
UTILISATION
1 - RECEVOIR UN APPEL
Lorsque le téléphone sonne, décrochez le combiné pour parler
à votre correspondant.
2 - APPELER
- Décrochez le combiné.
- Composez le numéro de votre correspondant.
- La conversation terminée, raccrochez le combiné pour libérer
la ligne.
3 - RAPPEL DU DERNIER NUMERO
- Décrochez le combiné.
- Appuyez sur la touche
, le numéro de votre corres-
pondant se recompose automatiquement.
4 - RAPPEL D’ENREGISTREUR «R»
Touche d’accès aux Services de France Télécom.
5 - FONCTION SECRET
Cette touche permet de couper ponctuellement le microphone
en cours de communication.
- Appuyez et maintenez la touche
. Votre correspondant ne
vous entend plus.
- Relâchez la touche pour rétablir la conversation.
F
Wall mount template / Montage mural
79 mm