Operation Manual

Before registering a handset to the base, you should press and

hold the key on the bottom of the base for about 5 seconds

and then release it.

Press (left side) to activate the menu

Use and to scroll through the menu to select

‘REGISTRATION’

Press (left side) to select

Use and to scroll through the base names list

Press (left side) to select desired base. The

handset will search for the requested base and the

relevant information will flash on the LCD.

If the base is found and the handset is successfully

registered, you will be prompted to enter the PIN code

(the default is 0000).

If the PIN code is accepted, the registration tone will

sound and the base assigns a number to the handset. If

the PIN code entered is invalid, a warning tone will sound,

and the handset will return to the

previous registration state.

ADDITIONAL HANDSETS & BASES